118 Degree Cobalt Heavy-Duty Taper Length Drill Cleveland 2513 Straw HSS-CO 8% (M42) RHS/RHC 1/2
| Item | Taper Length Drill Bit |
|---|---|
| Number of Flutes | 2 |
| Overall Length | 7-3/4 in |
| Flute Length | 5-3/4 in |
| Drill Bit Size | 1/2 in |
| Drill Bit Point Angle | 118 deg |
| Cutting Direction | Right Hand |
| Drill Bit Finish | Bronze, Straw |
| Drill Bit Material | Cobalt |
| Shank Dia. | 1/2 in |
| Decimal Equivalent | 0.5 |
| Application | For Stainless Steel, Tool Steel, High Carbon Steel, Medium Carbon Steel, Low Carbon Steel, Cast Iron, Aluminum, Brass, Plastic, Nickel Alloy |
| Drill Bit Dimension Type | Fractional Inch |
| Drill Bit Grouping | Drill Bit |
| Coolant Through | No |
| Standards | AIS |
| Flute Type | Spiral |
| Shank Type | Straight |
| Point type | Notched |
| Grade | Heavy Duty |
| Sizes Included | 1/2" |
| List Number | 2513 |
| Depth x Dia. Ratio | 4 xD |
| Depth:Dia. Ratio | 4 xD |
| Coolant Fed | Non-Coolant Through |
| Drill Bit Point Type | Notched Point |
| Drill Length Class | Taper Length |
| Shank Length | 2 in |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Material - Machining | Cobalt |
| Primary Material Application ISO Code | P, K |
| Drill Point Length | 0.1502 in |
| Helix Angle | 21 Degrees /34 Degrees |
| Measurement System | Fractional Inch |
| Series | 2513 |
| Secondary Material Application | Cast Iron, Carbon Steel, Stainless Steel |
| Shank Type - Machining | Straight |
| Secondary Material Application ISO Code | M, P, K |
| Maximum Drilling Depth | 5-3/4 in |
| Finish - Machining | Straw, Bronze |
| Drill Diameter Tolerance | +0.0000 in /-0.0010 in |
| Material Grade - Machining | M42 |
| Spiral Direction | Right Hand |
| Package Quantity | 1 |