118 Degree High-Helix Taper Length Drill Cleveland 2550 Bright HSS RHS/RHC 9/64
| Item | Taper Length Drill Bit |
|---|---|
| Number of Flutes | 2 |
| Overall Length | 5-3/8 in |
| Flute Length | 3 in |
| Drill Bit Size | 9/64 in |
| Drill Bit Point Angle | 118 deg |
| Cutting Direction | Right Hand |
| Drill Bit Finish | Bright |
| Drill Bit Material | High Speed Steel |
| Shank Dia. | 9/64 in |
| Decimal Equivalent | 0.1406 |
| Application | For Drilling Carbon Steel, Alloy Steel, Aluminum and Non-Ferrous Materials. |
| Coolant Through | No |
| Flute Type | Helical |
| Drill Bit Grouping | Drill Bit |
| Grade | General Purpose |
| List Number | 2550 |
| Drill Bit Dimension Type | Fractional Inch |
| Shank Type | Straight |
| Point Type | Radial |
| Standards | ASME B94.11M-1993 |
| Sizes Included | 9/64" |
| Depth x Dia. Ratio | 4 xD |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Drill Bit Point Type | Conventional Point |
| Finish - Machining | Bright |
| Spiral Direction | Right Hand |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Steel |
| Maximum Drilling Depth | 3 in |
| Shank Type - Machining | Straight |
| Primary Material Application ISO Code | P, N |
| Secondary Material Application ISO Code | P |
| Material - Machining | High Speed Steel |
| Drill Length Class | Taper Length |
| Measurement System | Fractional Inch |
| Secondary Material Application | Carbon Steel |
| Series | 2550 |
| Helix Angle | 35 Degrees /45 Degrees |
| Material Grade - Machining | General Purpose |
| Shank Length | 2-3/8 in |
| Drill Point Length | 0.0422 in |
| Drill Diameter Tolerance | +0.0000 in /-0.0007 in |
| Package Quantity | 1 |