118 Degree Taper Shank Taper Length Drill Cleveland 2410 Steam Oxide HSS RHS/RHC 1-7/16
| Item | Taper Shank Drill Bit |
|---|---|
| Number of Flutes | 2 |
| Overall Length | 14 3/4 in |
| Drill Bit Size | 1 7/16 in |
| Flute Length | 9-1/8 in |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 1.4375 |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Material | High Speed Steel |
| Shank Type | Taper |
| Flute Type | Spiral |
| Point Type | Radial |
| Application | For Drilling Carbon Steel, Plastic and Cast Iron Material |
| Morse Taper | #4 |
| Drill Bit Dimension Type | Fractional Inch |
| Standards | ASME B94.11M-1993 |
| List Number | 2410 |
| Grade | General Purpose |
| Coolant Through | No |
| Drill Bit Finish | Steam Oxide |
| Depth x Dia. Ratio | 4 xD |
| Depth:Dia. Ratio | 4 xD |
| Coolant Fed | Non-Coolant Through |
| Series | 2410 |
| Secondary Material Application | Cast Iron |
| Drill Diameter Tolerance | +0.0000 in /-0.0015 in |
| Spiral Direction | Right Hand |
| Maximum Drilling Depth | 9-1/8 in |
| Helix Angle | 21 Degrees to 34 Degrees |
| Finish - Machining | Black Oxide |
| Primary Material Application ISO Code | P, K |
| Measurement System | Fractional Inch |
| Material - Machining | High Speed Steel |
| Drill Bit Point Type | Conventional Point |
| Taper Shank Size | MT4 |
| Secondary Material Application ISO Code | K |
| Material Grade - Machining | General Purpose |
| Primary Material Application | Cast Iron, Steel |
| Shank Type - Machining | Taper |
| Package Quantity | 1 |