135 Degree NAS 907 Type J Cobalt Heavy-Duty Jobber Length Drill Cleveland 2213 Straw HSS-CO 8% 29/64
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 5-5/8 in |
| Drill Bit Point Angle | 135 Degrees |
| Drill Bit Size | 29/64 in |
| Number of Flutes | 2 |
| Shank Dia. | 7/16 in |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | Straw, Bronze |
| Shank Type - Machining | Straight |
| Decimal Equivalent | 0.4531 |
| Flute Type | Spiral |
| Standards | NAS 907 Type J |
| Flute Length | 4-3/16 in |
| Drill Bit Dimension Type | Fractional Inch |
| List Number | 2213 |
| Application | Stainless Steel, Alloy Steel, Titanium, For Abrasion Resistance |
| Drill Bit Grouping | Drill Bit |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Helix Angle | 21 Degrees to 34 Degrees |
| Shank Length | 1-7/16 in |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Stainless Steel, Steel |
| Material Grade - Machining | M42 |
| Primary Material Application ISO Code | P, N, M |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Measurement System | Fractional Inch |
| Spiral Direction | Right Hand |
| Series | 2213 |
| Secondary Material Application ISO Code | S, K |
| Maximum Drilling Depth | 3-1/8 in |
| Secondary Material Application | Cast Iron, Hi-Temp Alloy |
| Aircraft Drill | Yes |
| Drill Bit Point Type | Split Point |
| Drill Length Class | Jobber Length |
| Drill Point Length | 0.0938 in |
| Sheeter Drill | No |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Package Quantity | 1 |