135 Degree NAS 907 Type J Cobalt Heavy-Duty Jobber Length Drill Cleveland 2213 Straw HSS-CO 8% RHS/RHC #78
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 7/8 in |
| Drill Bit Point Angle | 135 Degrees |
| Drill Bit Size | #78 |
| Number of Flutes | 2 |
| Shank Dia. | 1/64 in |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | Straw, Bronze |
| Shank Type - Machining | Straight |
| Application | Stainless Steel, Alloy Steel, Titanium, For Abrasion Resistance |
| Decimal Equivalent | 0.016 |
| Drill Bit Dimension Type | Wire |
| Flute Length | 3/16 in |
| Flute Type | Spiral |
| Drill Bit Grouping | Drill Bit |
| Number of Pieces | 12 |
| Standards | NAS 907 Type J |
| List Number | 2213 |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Helix Angle | 21 Degrees to 34 Degrees |
| Shank Length | 11/16 in |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Stainless Steel, Steel |
| Primary Material Application ISO Code | P, N, M |
| Secondary Material Application | Cast Iron, Hi-Temp Alloy |
| Aircraft Drill | Yes |
| Drill Point Length | 0.0033 in |
| Material Grade - Machining | M42 |
| Drill Bit Point Type | Split Point |
| Maximum Drilling Depth | 1/8 in |
| Spiral Direction | Right Hand |
| Secondary Material Application ISO Code | S, K |
| Series | 2213 |
| Drill Length Class | Jobber Length |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Measurement System | Wire |
| Number of Coolant Holes | 0 |
| Web Thinning | Thinned |
| Sheeter Drill | No |
| Package Quantity | 1 |