CLE-MAX 118 Degree Jobber Length Drill Cleveland 2001G Steam Oxide HSS-E RHS/RHC #35
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 2-5/8 in |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Size | #35 |
| Number of Flutes | 2 |
| Shank Dia. | 7/64 in |
| Material - Machining | Vanadium High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Black Oxide |
| Shank Type - Machining | Straight |
| Application | For Low Carbon Steel, 300 Series Stainless Steel and Cast Iron. |
| Drill Bit Dimension Type | Wire |
| Flute Length | 1-1/2 in |
| Decimal Equivalent | 0.11 |
| Standards | ASME B94.11M |
| Drill Bit Grouping | Drill Bit |
| List Number | 2001G |
| Flute Type | Spiral |
| Depth:Dia. Ratio | 4 xD |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 1-1/8 in |
| Diameter | 0.11 |
| Measurement System | Wire |
| Drill Style | Jobber Drill |
| Shank Size | 0.11 |
| Helix Angle | 21 Degrees to 34 Degrees |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Drill Point Length | 0.033 in |
| Maximum Drilling Depth | 1-1/8 in |
| Series | 2001G |
| Spiral Direction | Right Hand |
| Material Grade - Machining | General Purpose |
| Drill Length Class | Jobber Length |
| Primary Material Application ISO Code | P, K, M |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Drill Bit Point Type | Conventional Point |
| Web Thinning | Thinned |
| Sheeter Drill | No |
| Number of Coolant Holes | 0 |
| Aircraft Drill | No |
| Package Quantity | 1 |