Q-Cobalt 135 Degree Wide Land Parabolic Taper Length Drill Cleveland 2575 Straw HSS-CO 8% RHS/RHC 1/4-E
| Item | Taper Length Drill Bit |
|---|---|
| Number of Flutes | 2 |
| Overall Length | 6-1/8 in |
| Flute Length | 3-3/4 in |
| Drill Bit Size | 1/4 in |
| Drill Bit Point Angle | 135 deg |
| Cutting Direction | Right Hand |
| Drill Bit Finish | Bronze, Straw |
| Drill Bit Material | Cobalt Steel |
| Shank Dia. | 1/4 in |
| Decimal Equivalent | 0.25 |
| Application | For Stainless Steel, Tool Steel, High Carbon Steel, Medium Carbon Steel, Low Carbon Steel, Cast Iron, Aluminum, Brass, Plastic, Nickel Alloy |
| Flute Type | Spiral |
| List Number | 2575 |
| Sizes Included | 1/4" |
| Coolant Through | No |
| Shank Type | Straight |
| Depth:Dia. Ratio | 10 xD |
| Grade | High Performance |
| Drill Bit Dimension Type | Fractional Inch |
| Depth x Dia. Ratio | 10 xD |
| Point Type | Split point |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Drill Point Length | 0.0518 in |
| Spiral Direction | Right Hand |
| Maximum Drilling Depth | 3-3/4 in |
| Shank Type - Machining | Straight |
| Drill Diameter Tolerance | +0.0000 in /-0.0007 in |
| Material Grade - Machining | M42 |
| Drill Length Class | Taper Length |
| Primary Material Application | Brass, Bronze, Copper, Aluminum |
| Helix Angle | 35 Degrees /45 Degrees |
| Drill Bit Point Type | Split Point |
| Material - Machining | Cobalt |
| Series | 2575 |
| Measurement System | Fractional Inch |
| Primary Material Application ISO Code | N |
| Finish - Machining | Straw, Bronze |
| Shank Length | 2-3/8 in |
| Package Quantity | 1 |