Hot Melt Adhesive, FRP Series, Tan, 10.2 oz, Cartridge
| Item | Hot Melt Adhesive |
|---|---|
| Type | Adhesive |
| Application | For Use in the Installation of Split Columns, Capitals, and Bases |
| Color | Tan |
| Container Size | 10.2 fl oz |
| Container Type | Cartridge |
| Materials Bonded | Fiberglass |
| Begins to Harden | 4 min |
| Chemical Base | Solvent Base |
| Application Temp. Range | 50 to 90 deg F |
| Adhesive Color | Clear |
| Tensile Strength | 3,800 psi |
| Standards | ASTM D-149, ASTM D-412 |
| VOC Content | 2.0g |
| Viscosity | Non-Sag |
| Application Family | Electrical, HVAC |
| Temp. Range | -40 to 180 deg F |
| Curing Time | 24 to 72 hr. |
| Material | Urethane, ABS, Rubber, Cement, Neoprene |
| Shear Strength | 2,700 psi |
| Specific Gravity | 1.27 |
| VOC Content Weight | 2 g/L |
| Maximum Performance Temperature | 180 deg F |
| Water Resistance | Waterproof |
| Minimum Performance Temperature | -40 Degrees F |
| Primary Applications | Concrete, Masonry |
| Solvent-Free | No |
| Low Odor | No |
| VOC Content Weight Percentage | 0.18% |
| Finishing Features | Sandable |
| Application Method | Dispensing Gun |
| Working Time | 4 min |
| Full Cure Time | 1 to 3 day |
| Minimum Application Temperature | 50 deg F |
| Maximum Viscosity | 1,000,000 cps |
| Minimum Viscosity | 1,000,000 cps |
| Features | Chemical Resistant, Dries Clear, Non-Flammable Once Cured, Temperature Resistant |
| Maximum Application Temperature | 90 deg F |
| Non-Sagging | Yes |
| Interior/Exterior | Exterior, Interior |
| Series | FRP |
| Full Cure | 1 to 3 day |
| Container Type - Adhesives | Cartridge |
| Container Size - Adhesives | 10.2 fl oz |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |