The FPW Series washdown gear motors are watertight, dust-resistant geared induction motors which conform to IEC standard IP67.
| Power | 40 W (1/19 HP) |
|---|---|
| Rated Speed | 250 [50 Hz] 300 [60 Hz] |
| Frame Size | 90 mm |
| Voltage | Single-Phase 220/230 VAC |
| Current | 0.34 A [230 VAC, 60 Hz] 0.35 A [220 VAC, 60 Hz] 0.39 A [220/230 VAC, 50 Hz] |
| Frequency | 60 50 |
| Rated Torque | 1.3 N·m [60 Hz] 1.5 N·m [50 Hz] |
| Shaft Diameter | 12 mm |
| Ip Rating | IP67 |
| product line | Oriental Motor® |
| motor type | IP67 Rated Washdown Induction |
| frame size(imperial) | 3.54 in |
| output power | 40 W (1/19 HP) |
| voltage (vac) | Single-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| gear ratio (x:1) | 6 :1 |
| output shaft diameter | 12 mm |
| type | Cable |
| rated torque(imperial) | 11.5 lb-in [60 Hz] 13.2 lb-in [50 Hz] |
| rated speed (rpm) | 250 [50 Hz] 300 [60 Hz] |
| permissible load inertia | 27 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 148 oz-in² |
| permissible overhung load | 10 mm from Shaft End = 250 N 20 mm from Shaft End = 350 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 56 lb 0.79 in. from Shaft End = 78 lb |
| permissible thrust load | 100 N |
| permissible thrust load(imperial) | 22 lb |
| rohs compliant | Yes |
| safety standards | UL CSA CCC EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | 144ºF (80ºC) or less measured by the resistance change method after rated motor operation under normal ambient temperature and humidity. |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| degree of protection | IP67 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | FPW540C2-6E |
| Lead Time | Estimated Ship: 10/29/2024 |