The FPW Series washdown gear motors are watertight, dust-resistant geared induction motors which conform to IEC standard IP67.
| Power | 90 W (1/8 HP) |
|---|---|
| Gear Ratio | 15 |
| Rated Speed | 100 [200 VAC, 50 Hz] 120 [60 Hz] |
| Rated Torque | 6.2 N·m [60 Hz] 7.4 N·m [50 Hz] |
| Frame Size | 104 mm |
| Voltage | Three-Phase 200/220/230 VAC |
| Current | 0.49 A [230 VAC, 60 Hz] 0.50 A [220 VAC, 60 Hz] 0.51 A [200 VAC, 60 Hz] 0.54 A [200 VAC, 50 Hz] |
| Electrical Phase | Three-Phase 200/220/230 VAC |
| Frequency | 60 50 |
| Shaft Diameter | 18 mm |
| Ip Rating | IP67 |
| product line | Oriental Motor® |
| motor type | IP67 Rated Washdown Induction |
| frame size(imperial) | 4.09 in |
| output power | 90 W (1/8 HP) |
| voltage (vac) | Three-Phase 200/220/230 VAC |
| frequency (hz) | 60 50 |
| gear ratio (x:1) | 15 :1 |
| output shaft diameter | 18 mm |
| type | Cable |
| rated torque(imperial) | 54 lb-in [60 Hz] 65 lb-in [50 Hz] |
| rated speed (rpm) | 100 [200 VAC, 50 Hz] 120 [60 Hz] |
| permissible load inertia | 450 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 2500 oz-in² |
| permissible overhung load | 10 mm from Shaft End = 650 N 20 mm from Shaft End = 1000 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 146 lb 0.79 in. from Shaft End = 220 lb |
| permissible thrust load | 200 N |
| permissible thrust load(imperial) | 45 lb |
| rohs compliant | Yes |
| safety standards | UL CSA CCC EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | 126ºF (70ºC) or less measured by the resistance change method after rated motor operation under normal ambient temperature and humidity. |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) [Three-Phase 200 V: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing)] |
| degree of protection | IP67 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | FPW690S2-15 |
| Lead Time | Estimated Ship: 10/29/2024 |