| Use With - Motion Sensing and Dimming | Hubbell CU300A, CU300HD, CU300M |
|---|---|
| Item - Motion Sensing and Dimming | Occupancy Sensor |
| Communication Method - Motion Sensing and Dimming | Hard Wired |
| Sensing Technology | Passive Infrared |
| Installation Location - Motion Sensor | Wall |
| Coverage at Suggested Mounting Height | 1,600 sq ft |
| Operating Voltage - Motion Sensing and Dimming | 24 V DC |
| Color - Motion Sensing and Dimming | Office White |
| Time Delay Adjustment Method - Motion Sensor | Adaptive, Manual |
| Time Delay - Motion Sensor | 8 to 40 min |
| Timer Range | 8 to 40 min. |
| Max. Capacity @ 120VAC | Dependent on Control Unit Rating |
| Coverage | 1,600 sq ft |
| Voltage | 24VDC |
| Includes | Isolated Relay |
| Lighting Technology | LED |
| Color | White |
| Standards | ASHRAE 90.1, cULus Listed, UL244A |
| Time Delay | Adaptive/Manual |
| Sensor Type | Passive Infrared |
| Coverage Angle - Motion Sensor | 115 deg |
| Suggested Mounting Height - Motion Sensor | 8 to 12 ft |
| Description/Special Features | Isolated Relay and Photocell |
| Viewing Angle | 115 deg |
| Item | Occupancy Sensor |
| Max. Capacity @ 277VAC | Dependent on Control Unit Rating |
| For Use With | Mfr. No. CU300A/M/HD |
| Installation Type | Wall |
| Communication Method | Hard Wired |
| Width | 2 in |
| Height | 6 in |
| Type | Sensors |
| Wall Plate | Not Included |
| Maximum Mounting Height | 12 ft |
| Sensor Operation | Occupancy, Photocell |
| Minimum Mounting Height | 8 ft |
| Minimum Operating Temperature | 32 deg F |
| Manufacturer Warranty | Limited Lifetime |
| Power Relay Required | Yes |
| Compatible with Manufacturer Model Number | CU300A, CU300HD, CU300M |
| Installation Location | Wall |
| Overall Width | 2 in |
| Maximum Operating Temperature | 104 deg F |
| Overall Diameter | 1-1/2 in |
| Maximum Coverage Area | 1,600 sq ft |
| Load Rating @ 120V AC | Dependent on Control Unit Rating |
| Time Delay Adjustment Method | Adaptive |
| Compatible with Brand | Hubbell Wiring |
| Coverage Angle | 110 deg |
| Minimum Time Delay | 8 min |
| Overall Height | 6 in |
| Load Rating @ 277V AC | Dependent on Control Unit Rating |
| Maximum Time Delay | 40 min |
| Item Type | Sensors |
| Diameter | 1-1/2 in |
| Material - Mounting Hardware | Screw Mounting |
| Style | Wall Mount |
| Device Color | Office White |
| Load Capacity | Load Is A Function Of The Control Unit |
| Humidity | 0% to 95% non-condensing relative humidity |
| Isolated Relay | Normally open and normally closed, terminals available |
| Power Requirements | 24V DC nominal, 33mA from Hubbell CU series control unit |
| Photocell | Yes |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) with rate of change not exceeding 20°F (11°C) per hour |
| CU300M | Control Unit, HD, Latching, |
| CU300HD | Wall Switch Wire Guard |
| Voltage Rating Description | Low Voltage |
| Sensing Coverage | 1600 Square Feet |
| Ambient Light | 1 to 1000 foot candles |
| Version | Unit with Relay and Photocell |
| Passive Infrared | Red LED |
| Storage Temperature Range | -20°F to 150°F |
| Supply Voltage | Low Voltage V |
| Indicator(s) Type | PIR= Red LED |
| Series | Passive Infrared |
| Material | ABS |
| Product Type | Sensor |
| Operating Cycles | 6,000 Cycles Minimum |
| Storage Temperature | -20°F to 150°F ; 0% to 95% non-condensing relative humidity |
| Environmental Conditions | Indoor Dry Unless Protected By Additional Means |
| OEM Brand Name | Hubbell Wiring Device-Kellems |
| Mounting Type | Wall |
| Sensitivity | 0 to 100% (Adaptive) |
| CU300A | Control Unit Manual-ON |
| Package Quantity | 1 |