Extended Die Grinder, 3/8 in NPT Female Air Inlet, 3 mm, 1/8 in Collet, Heavy Duty, 7,500 RPM
| Item | Die Grinder |
|---|---|
| Overall Length | 12 in |
| Air Inlet | 3/8 in NPT Female |
| Horsepower | 1 |
| Free Speed | 7,500 rpm |
| Max. Speed | 7,500 rpm |
| Grinder Type | Extended |
| Includes | 1/4 in Collet, 6mm Collet, Piped Exhaust, Wrenches |
| Collet | 3 mm, 1/8 in |
| Grinder Orientation | Extended |
| Throttle | Safety Lever |
| Variable Speed | No |
| Housing Material | Steel |
| Duty | Heavy Duty |
| Handle Material | Composite |
| Bearing Type | Ball/Needle |
| Characteristics | Lube Free Motor |
| Min. Hose Size | 3/8 in |
| CFM @ Full Load | 40 |
| Tool Weight | 3 lb |
| Air Pressure | 90 psi |
| Kit Contents | Bare Tool |
| Lock-On Switch | No |
| Series | M2 Series |
| Vibration Level | 0.3 m/sq sec, 0.8 m/sq sec |
| Grip Style | Barrel Grip |
| Application | Cleaning, Cutting, Heavier-Duty Grinding, Polishing |
| Air Inlet Connection Size | 3/8 in |
| Power Source | Air Powered |
| Collet Size | 1/4 in, 6 mm |
| Tool Style | Straight Extended |
| Accessory Free Tool Change | Yes |
| Safety Features | Locking Throttle Lever |
| Lock-Off Switch | Yes |
| Air Inlet Gender | Female |
| Switch Location | Top |
| Tether Style | Not Tether Capable |
| Exhaust Location | Rear |
| Switch Type | Safety Lever |
| Air Inlet Type | NPT |
| Features | Back Cap and Muffler with Easy Rear Access for Cleaning, Efficiency and Life of Abrasives, Ergonomic Handle Design for Enhanced Operator Comfort to Reduce Fatigue and to Improve Productivity, Lightweight and Ergonomic Body, Lube-Free for Reduced Maintenance, Motor Controller Prevents Over-Speeding and Manages Airflow for Efficient Use, Speed Governed to Maximize Productivity |
| Minimum Speed | 7,500 rpm |
| Standards | ISO 28927, ISO15744 |
| Air Consumption | 25 cfm |
| Safety Stop Mechanisms | Not Applicable |
| Package Quantity | 1 |