Type 27 Die Grinder, 3/8 in NPT Female Air Inlet, 6 mm, 1/4 in Collet, Heavy Duty, 12,000 RPM
| Item | Die Grinder |
|---|---|
| Overall Length | 9 in |
| Air Inlet | 3/8 in NPT Female |
| Horsepower | 1 |
| Free Speed | 12,000 rpm |
| Max. Speed | 12,000 rpm |
| Grinder Type | Right Angle |
| Includes | 1/4 in Collet, 6mm Collet, Piped Exhaust, Side Handle, Wrenches |
| Throttle | Safety Lever |
| Housing Material | Steel |
| Average CFM @ 15 Second Run Time | 4.25 |
| Variable Speed | No |
| Min. Hose Size | 3/8 in |
| Right Angle Length | 3-9/32 in |
| Characteristics | Lube Free Motor |
| Handle Material | Composite |
| CFM @ Full Load | 40 |
| Duty | Heavy Duty |
| Bearing Type | Ball/Needle |
| Grinder Orientation | Right Angle |
| Collet | 6 mm, 1/4 in |
| Tool Weight | 3.6 lb |
| Tether Style | Not Tether Capable |
| Air Inlet Gender | Female |
| Standards | ISO 28927, ISO15744 |
| Safety Features | Locking Throttle Lever |
| Safety Stop Mechanisms | Not Applicable |
| Power Source | Air Powered |
| Air Consumption | 17 cfm |
| Grip Style | Barrel Grip |
| Vibration Level | 0.8 m/sq sec, 2.3 m/sq sec |
| Tool Style | Right Angle |
| Lock-On Switch | No |
| Switch Type | Safety Lever |
| Switch Location | Top |
| Exhaust Location | Rear |
| Series | M2 Series |
| Air Inlet Type | NPT |
| Lock-Off Switch | Yes |
| Features | Back Cap and Muffler with Easy Rear Access for Cleaning, Efficiency and Life of Abrasives, Ergonomic Handle Design for Enhanced Operator Comfort to Reduce Fatigue and to Improve Productivity, Lightweight and Ergonomic Body, Lube-Free for Reduced Maintenance, Motor Controller Prevents Over-Speeding and Manages Airflow for Efficient Use, Speed Governed to Maximize Productivity |
| Air Pressure | 90 psi |
| Kit Contents | Bare Tool |
| Air Inlet Connection Size | 3/8 in |
| Minimum Speed | 12,000 rpm |
| Collet Size | 1/4 in, 6 mm |
| Application | Cleaning, Cutting, Heavier-Duty Grinding, Polishing |
| Accessory Free Tool Change | Yes |
| Package Quantity | 1 |