Epoxy Adhesive, PlasticBonder Series, Tan, Syringe, 1:01 Mix Ratio, 30 min Functional Cure
| Item | Epoxy Adhesive |
|---|---|
| Type | Plastic Bonder |
| Color | Tan |
| For Use On | ABS, Fiberglass, Glass, Most Composites, Most Hard Plastics, PVC, Vinyl |
| Container Type | Syringe |
| Functional Cure | 30 min |
| Full Cure | 1 hr |
| Mixing Ratio | 1:01 |
| Shear Strength | Not Applicable |
| Temp. Range | 0 to 250 deg F |
| Working Time | 15 min |
| Series | PlasticBonder |
| Epoxy Container | Syringe |
| For Use With | ABS, Fiberglass, Glass, Most Composites, Most Hard Plastics, PVC, Vinyl |
| Structural Adhesive Type | Epoxy Adhesive |
| Epoxy Max. Temp | 250 to 299 deg F |
| Size | 0.85 fl oz |
| Epoxy Color | Tan |
| Work Life | 15 min |
| Temp. Range (F) | 0 to 250 |
| Includes | Resin and Hardener |
| Resin Type | Epoxy |
| Standards | OSHA 29 CFR 1910.1200 |
| Cure Method | Ambient |
| Included Components | Hardener, Resin |
| Primary Applications | Plastics |
| Interior/Exterior | Exterior, Interior |
| Maximum Viscosity | 30,000 cps |
| Features | Permanent Bond |
| Full Cure Time | 1 hr |
| Maximum Application Temperature | 120 deg F |
| Marine Grade | No |
| Total Volume | 25 mL |
| VOC Content Weight Percentage | Less Than 1% |
| Low Odor | No |
| Alternate Product Name | Plasticbonder Syringe |
| Maximum Performance Temperature | 250 deg F |
| Water Resistance | Not Water-Resistant |
| Non-Sagging | No |
| Tensile Strength | 3,770 psi |
| Cured Color | Tan |
| Materials Bonded | ABS Plastic, Ceramic, Concrete, Fiberglass, Glass, Masonry, Composite, Plastic, PVC, Vinyl, Wood |
| Minimum Application Temperature | 0 deg F |
| Container Type - Adhesives | Syringe |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |