Diamond Turning Insert, Diamond, 3, VNGA, 3, Ceramic
| Item | Diamond Turning Insert |
|---|---|
| Insert Shape | Diamond |
| Insert Style | VNGA |
| Inscribed Circle | 3 |
| Insert Size | 333 |
| Chip-Breaker | No |
| Grade | PT600M |
| Corner Radius | 3 |
| Insert Material | Ceramic |
| Insert Application | Roughing |
| Rake | Negative |
| ISO Number | VNGA160412T02025 |
| Insert Thickness | 0.188 in |
| No. of Edges | 2 |
| Nose Radius | 0.0469 in |
| Mounting Style | Rigid Clamp |
| Stainless (M) Compatibility | No |
| For Use With | Mfr. No. DVJNR/L 12-3B, DVJNR/L 16-3D, MVJNR/L 12-3B, MVJNR/L 16-3C |
| Cast Iron (K) Compatibility | No |
| Steel (P) Compatibility | No |
| Mounting Hole Dia. | 0.15 in |
| Hardened (H) Compatibility | Yes |
| Super Alloy (S) Compatibility | No |
| Relief Angle | 0 Degrees |
| Cutting Direction | Neutral |
| ANSI Number | VNGA333T00825 PT600M |
| Coating | Al2O3, TiC |
| Non Ferrous (N) Compatibility | No |
| Workpiece Compatibility | Hardened (H) |
| Secondary Material Application | Hardened Steel |
| Insert Holding Type | Screw |
| Primary Material Application | Cast Iron |
| Number of Cutting Edges | 4 |
| Finish - Machining | Al2O3+TiC |
| Features | Heat Resistant |
| Thickness | 3 |
| ANSI Code | VNGA333T00825 PT600M |
| Primary Material Application ISO Code | H |
| Manufacturer Grade | PT600M |
| Shape | Rhombic |
| Cutting Application | Turning |
| Secondary Material Application ISO Code | K |
| Material - Machining | Ceramic |
| Clearance Angle | 0 deg |
| Measurement System | Fractional Inch |
| Included Angle | 35 Degrees |
| Material | Ceramic |
| Package Quantity | 1 |