Occ Snsr, PIR, 120/230/277V AC, Ivory
| Item | Occupancy Sensor |
|---|---|
| Color | Ivory |
| Standards | cUL/US Certified, FCC Approved, Title 24, Part 6 |
| Operating Voltage - Motion Sensing and Dimming | 120/230/277 V AC |
| Coverage at Suggested Mounting Height | 2,100 sq ft |
| Sensing Technology | Passive Infrared |
| Communication Method - Motion Sensing and Dimming | Hard Wired |
| Time Delay Adjustment Method - Motion Sensor | Adjustable, Adaptive |
| Coverage Angle - Motion Sensor | 180 Degrees |
| Max. Capacity @ 120VAC | 1200V (Primary Relay Fluorescent), 800V (Secondary Relay Fluorescent), 800W (Incandescent) |
| Item - Motion Sensing and Dimming | Occupancy Sensor |
| Time Delay - Motion Sensor | 30 sec to 30 min |
| Color - Motion Sensing and Dimming | White |
| Description/Special Features | Beep Warn - Unit Beeps 3 Times After Delayed-Off Time Expires, then Waits 10 Seconds Before Turning Lights Off, Convenient Dual Pushbuttons Provide Manual-On/Off Light Switching of Each Load At Any Time, Daylight Harvesting Light Sensor Measures the Ambient Light in the Room When it First Detects Motion, Exclusive Leviton H.I.S. Circuitry, Exclusive Walk-Through, False Detection Circuitry, Ground Connection Required. Gangable With Other Devices, Horizontal Field-Of-View May be Adjusted Between 180 Degrees and 60 Degrees Arc by Using Integral Blinders Located on Either Side of the Lens. No Mask-Ing Tape Required, Light Sensor Adjustable Ambient Light Override Ranges From Approximately 2Fc (20 Lux) to 500+Fc (5000+ Lux), Low-Profile Design Eliminates Obtrusive "Scanning-Device" Look, Manual-On/Auto-Off Mode for Installations Where Manual-on Switching is Required But Auto-Off Switching is Still Desired for CEC Title T24 Energy Savings, ODSOD-ID Classroom Mode, ODSOD-ID Conference Room Mode, Presentation Mode, Segmented Fresnel Lens Provides Optimum Sensitivity and Performance. Designed With An Extensive "Minor Motion" Area Where Even Slight Body Movements will be Detected, to Comply With CEC Title 24, Red Led Indicator Light Flashes When PIR Sensor Detects Motion to Verify Detection is Active, Unit Fits in Standard Single-Gang Wallbox and Replaces Two Single-Pole Wall Switches, Vandal Resistant PIR Lens |
| Includes | Photocell |
| Lighting Technology | Incandescent, LED |
| Installation Location - Motion Sensor | Wall Switch Box |
| Max. Capacity @ 277VAC | 2700V (Primary Relay Fluorescent) |
| Overall Width | 1-3/4 in |
| Fan Rated | Yes |
| Maximum Coverage Area | 2,100 sq ft |
| Rated Frequency | 50/60 Hz |
| Coverage Angle | 180 deg |
| Maximum Time Delay | 30 min |
| Load Rating @ 277V AC | 2,700V (Primary Relay Fluorescent) |
| Communication Method | Hard Wired |
| Installation Location | Wall |
| Number of Buttons | 2 |
| Series | Decora |
| Minimum Time Delay | 30 sec |
| Includes Wall Plate | Wall Plate Not Included |
| Number of Gangs | 1 |
| Dimming Method | No Dimming |
| Maximum Operating Temperature | 122 deg F |
| Overall Height | 4.06 in |
| Time Delay Adjustment Method | Adaptive |
| Maximum Detection Distance | 40 ft |
| Neutral Required | No |
| Nightlight | No |
| Compatible with Series | Switching Only (universal) |
| Overall Depth | 1.83 in |
| Coverage Type | Small Motion |
| Includes Motion Sensor | Yes |
| Includes Dimming Switch | Dimming Switch Not Included |
| Dimming Type | No Dimming |
| Manufacturer Warranty | 5 yr |
| Load Rating @ 120V AC | 1,200VA (Primary Relay Fluorescent), 800V (Secondary Relay Fluorescent), 800W (Incandescent) |
| Load Rating @ 480V AC | Not Applicable |
| Minimum Operating Temperature | 32 Degrees F |
| Sensor Operation | Occupancy, Photocell, Vacancy |
| Operating Voltage | 120/230/277V AC |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |