Anaerobic Gasket Maker, 515, 1.69 fl oz, Tube, Purple
| Application | Fuel and Water Pumps, Gearboxes and Transmission Housings, Split Crankcases, Thermostats |
|---|---|
| Color | Purple |
| Size | 50 mL |
| Temp. Range | -65 to 300 deg F |
| Item | Anaerobic Gasket Maker |
| Type | Flexible Seal |
| Full Cure | 24 hr |
| Begins to Harden | 10 min |
| Flash Point | 199.4 deg F |
| Specific Gravity | 1.1 |
| Tensile Strength | 14 N/sq mm |
| Shear Strength | 1,000 psi |
| VOC Content | 15.4 g/L |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Series | 515 |
| Container Size | 1.69 fl oz |
| Container Type | Tube |
| Chemical Base | Methacrylate Ester |
| Product Type | Sealant |
| Specific Sealing Application | Rigid Assemblies |
| Resistance Sensor Safe and Standards | No California Proposition 65, No CERCLA/SARA Section 302 EHS, No CERCLA/SARA Section 311/312, No CERCLA/SARA Section 313, No OSHA 29 CFR 1910.1200, No TSCA |
| Sensor Safe | No |
| Minimum Viscosity | 150,000 cps |
| Working Time | 30 min |
| Cure Type | Anaerobic |
| Maximum Viscosity | 1,700,000 cps |
| Minimum Operating Temperature | 14 deg F |
| For Material Type | Aluminum, Steel |
| Compatible Materials | Aluminum, Steel |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Maximum Gap Fill Size | 0.01 in |
| Maximum Operating Temperature | 300 deg F |
| Sealing Application | For Rigid Assemblies |
| Full Cure Time | 1 day |
| Subhead Properties | Standard |
| Product Form | Gel |
| Sealant Type | Gasket Maker |
| Properties | Standard |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |