Anaerobic Sealant Anaerobic Gasket Sealant, 850 mL, Purple, Temp Range up to 300 Degrees F
| Application | Apply a Continuous Bead of Product and Assemble the Mating Parts without Excessive Lateral Movement. Remove Excessive Contamination Such as Grease, Heavy Oils, and Dirt with Cleaning Solvent 7070 for Best Results. |
|---|---|
| Color | Purple |
| Size | 850 mL |
| Substrates | Metal-to-Metal Assemblies |
| Temp. Range | up to 300 Degrees F |
| Item | Anaerobic Gasket Sealant |
| Type | Anaerobic Sealant |
| Full Cure | 48 hr |
| Begins to Harden | Partial Cure is Obtained in 4 hr |
| Expansion Ratio | Fills Gaps Up to 0.050 in When Used On Active Metals with Loctite(R) 7649(TM) Primer N |
| Viscosity | Thixotropic Paste |
| Specific Gravity | 1.1 |
| Flash Point | 199.4 deg F |
| Characteristics | Eliminates most cut gaskets. Improves flange sealing reliability by overcoming problems associated with pre-cut gaskets and other formed-in-place gaskets. Anaerobic, ready-to-use gel-like material cures at room temperature. While uncured, product provides instant-seal properties for low-pressure production line testing. |
| Container Type | Cartridge |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Container Size | 28.74 fl oz |
| VOC Content | 134 g/L |
| Tensile Strength | 14 N/sq mm |
| Chemical Base | Methacrylate Ester |
| Minimum Operating Temperature | -10 deg C |
| For Material Type | Aluminum, Steel |
| Minimum Viscosity | 150,000 cps |
| Product Form | Gel |
| Cure Type | Anaerobic |
| Full Cure Time | 2 days |
| Maximum Gap Fill Size | 0.05 in |
| Working Time | 30 min |
| Shear Strength | 1,000 psi |
| Specific Sealing Application | Axle Covers, Compressors, Pumps, Thermostats, Transmission Housings |
| Sealant Type | Gasket Sealant |
| Maximum Viscosity | 1,700,000 cps |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Maximum Operating Temperature | 150 deg C |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |