Flexible Seal Anaerobic Gasket Maker, 300 mL, Purple, Temp Range -65 to 300 Degrees F
| Application | Fills Gaps Up to 0.010 in Unprimed, 0.050 in with Primer, Anaerobic Cure will Flex with Minor Flange Movements |
|---|---|
| Color | Purple |
| Size | 300 mL |
| Temp. Range | -65 to 300 deg F |
| Item | Anaerobic Gasket Maker |
| Type | Flexible Seal |
| Full Cure | 24 hr |
| Begins to Harden | Not Specified |
| Specific Gravity | 1.1 |
| Flash Point | 199.94 deg F |
| VOC Content | 15.4 g/L |
| Container Type | Cartridge |
| Container Size | 10.14 fl oz |
| Tensile Strength | 14 N/sq mm |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Shear Strength | 1,000 psi |
| Series | 515 |
| Chemical Base | Methacrylate Ester |
| Specific Sealing Application | Rigid Assemblies |
| Product Form | Gel |
| Full Cure Time | 1 day |
| Maximum Viscosity | 1,700,000 cps |
| Working Time | 30 min |
| Maximum Gap Fill Size | 0.01 in |
| Sensor Safe | No |
| Cure Type | Anaerobic |
| For Fluid Type | Butane, Natural Gas, Oil, Propane |
| Maximum Operating Temperature | 300 deg F |
| Sealant Type | Gasket Sealant |
| For Material Type | Aluminum, Steel |
| Minimum Viscosity | 150,000 cps |
| Minimum Operating Temperature | 14 deg F |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Properties | Standard |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |