Instant Adhesive, 454 Series, Clear, 7 oz, Tube
| Item | Instant Adhesive |
|---|---|
| Consistency | Thin Liquid |
| Application | For Difficult to Bond Surfaces, Use on Porous Substrates, Irregular Rough and Acidic Surfaces |
| Materials Bonded | Metal, Plastic, Rubber |
| Container Size | 7 fl oz |
| Container Type - Adhesives | Tube |
| Container Type | Tube |
| Working Time | 15 sec |
| Begins to Harden | 15 sec |
| Color | Clear |
| VOC Content Weight | 20 g/L |
| Series | 454 |
| Gap Fill | 0.25 mm |
| Characteristics | 1 Part No Mixing, Humidity Cure |
| VOC Content | 20g/L |
| Specific Gravity | 1.05 |
| Adheres To | For Difficult to Bond Surfaces, Use on Porous Substrates, Irregular Rough and Acidic Surfaces |
| Standards | 29 CFR 1910.1200, ABS, CFIA |
| Tensile Strength | 2,190 psi |
| Functional Cure | Not Specified |
| Adhesive Color | Clear |
| Chemical Type | Cyanoacrylate |
| Full Cure | 24 hr |
| Temp. Range | -65 to 250 deg F |
| Size | 200g |
| Viscosity | Gel |
| Built-in Dispenser Type | Applicator, No Dispenser |
| Low Odor | No |
| Impact Resistant | No |
| Minimum Viscosity | 150 cps |
| VOC Content Weight Percentage | 2 % |
| Compatible Accelerator | Loctite SF 712 |
| Water Resistance | Not Water-Resistant |
| Maximum Viscosity | 450 cP |
| Full Cure Time | 24 hr |
| Interior/Exterior | Interior Only |
| Shear Strength | 3,030 psi |
| Minimum Application Temperature | -65 deg F |
| Features | Non-Wicking, Specially Suited to Porous Materials |
| Primary Applications | Plastics |
| Electrically Insulating | Yes |
| Maximum Performance Temperature | 250 deg F |
| Cure Method | Humidity |
| Maximum Application Temperature | 250 deg F |
| Product Form | Gel |
| Container Size - Adhesives | 200 g |
| Begins to Harden - Adhesives | 15 sec |
| Viscosity - Adhesives | 150 to 450 cPs |
| Application method | Dispense System,Manual |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |