Instant Sealing, Oil-Resistant RTV Gasket Maker, 90 mL, Black, Temp Range -65 to 500 Degrees F
| Application | Compressors, Gearboxes, Intake Manifold End Seals, Stamping Sheet Metal Covers, Timing Gear Covers, Transmission Pans, Valve Covers, Water Pumps |
|---|---|
| Color | Black |
| Size | 90 mL |
| Substrates | Metal, Plastic |
| Temp. Range | -65 to 500 deg F |
| For Use On | Makes High Performance, Leakproof Gaskets in one Minute. Equipment Can be Returned to Service Immediately. Blowout Resistant. Outperforms Precut Gaskets |
| Sealant Base | Silicone |
| Sealant Container | Can |
| Item | RTV Gasket Maker |
| Type | Instant Sealing, Oil-Resistant |
| Full Cure | 24 hr |
| Begins to Harden | Not Specified |
| Viscosity | paste |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Includes | Nozzle |
| Characteristics | VOC-Free Propellant |
| Flash Point | 199.4 deg F |
| Specific Gravity | 1.3 |
| Container Type | Pressurized Can |
| Tensile Strength | 1.7 N/sq mm |
| Chemical Base | Oxime Silicone |
| Container Size | 3.04 fl oz |
| VOC Content | 50.7 g/L |
| Sensor Safe | No |
| Full Cure Time | 1 day |
| Hardness | Shore A31 to A46 |
| Cure Type | Room Temperature |
| Product Form | Paste |
| Shear Strength | 145 psi |
| Minimum Operating Temperature | -65 deg F |
| Maximum Gap Fill Size | 1/4 in |
| Sealant Type | Gasket Maker |
| Resistance Properties | Oil Resistant |
| Working Time | 15 min |
| For Fluid Type | Oil |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Maximum Operating Temperature | 400 deg F |
| For Material Type | Metal, Glass, Ceramic, Plastic |
| Series | SI 5900 |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |