Oil and Water-Resistant, Noncorrosive RTV Gasket Maker, 300 mL, Gray
| Application | Ideal for Sealing All Types of Flanges Including Stamped Sheet Metal Covers Where Water-Glycol Resistance is Required |
|---|---|
| Color | Gray |
| Size | 300 mL |
| Substrates | Metal, Plastic |
| Temp. Range | -75 to 625 deg F |
| For Use On | The Product is Designed Primarily for Flange Sealing with Excellent Oil Resistance or Rigid Flange Sealing for Example on Transmissions and Cast Metal Housings |
| Sealant Base | Silicone |
| Sealant Container | Cartridge |
| Item | RTV Gasket Maker |
| Type | Oil and Water-Resistant, Noncorrosive |
| Full Cure | 24 hr |
| Begins to Harden | 30 min |
| Flash Point | 199.4 deg F |
| Characteristics | Low Odor, Low Volatility, Noncorrosive, Oil and Water Resistant |
| Specific Gravity | 1.5 @ 20 Degrees C |
| Standards | California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, NSF Category P1, OSHA 29 CFR 1910.1200, TSCA |
| Container Type | Cartridge |
| VOC Content | 49.65 g/L |
| Chemical Base | Oxime Silicone |
| Container Size | 10.14 fl oz |
| Tensile Strength | 348 psi |
| Full Cure Time | 1 day |
| Cure Type | Room Temperature |
| Resistance Properties | Oil Resistant |
| Sensor Safe | No |
| Specific Sealing Application | Flexible Assemblies |
| Working Time | 30 min |
| Hardness | Shore A75 |
| Non-Hardening | Yes |
| For Material Type | Metal, Plastic |
| Sealant Type | Gasket Maker |
| Maximum Gap Fill Size | 0.2 in |
| Series | SI 5699 |
| Maximum Operating Temperature | 400 deg F |
| Product Form | Paste |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Minimum Operating Temperature | -65 deg F |
| Features | Non-Corrosive |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |