Oil and Water-Resistant, Noncorrosive RTV Gasket Maker, 70 mL, Gray, Temp Range -75 to 625 Degrees F
| Application | For Rigid Flange Assemblies, Speeds Cure of Anaerobics on Inactive Metals |
|---|---|
| Color | Gray |
| Size | 70 mL |
| Substrates | Transmissions and Cast Metal Housings |
| Temp. Range | -75 to 625 deg F |
| Item | RTV Gasket Maker |
| Type | Oil and Water-Resistant, Noncorrosive |
| Full Cure | 24 hr |
| Begins to Harden | 30 min |
| Standards | California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, NSF Category P1, OSHA 29 CFR 1910.1200, TSCA |
| Characteristics | Low Odor, Low Volatility, Noncorrosive, Oil and Water Resistant |
| Specific Gravity | 1.5 @ 20 Degrees C |
| Flash Point | 199.4 deg F |
| Container Type | Tube |
| For Use With | Metal,Plastic |
| Container Size | 2.37 fl oz |
| VOC Content | 49.65 g/L |
| Chemical Base | Oxime Silicone |
| Tensile Strength | 348 psi |
| Shear Strength | 15 psi |
| Sealant Type | Gasket Maker |
| Product Form | Paste |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Full Cure Time | 1 day |
| Minimum Operating Temperature | -65 deg F |
| Maximum Operating Temperature | 400 deg F |
| Sensor Safe | No |
| Specific Sealing Application | Flexible Assemblies |
| Non-Hardening | Yes |
| Series | SI 5699 |
| Working Time | 30 min |
| Features | Non-Corrosive |
| For Material Type | Metal, Plastic |
| Resistance Properties | Oil Resistant |
| Maximum Gap Fill Size | 0.2 in |
| Hardness | Shore A75 |
| Cure Type | Room Temperature |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |