Primer, Power Grab Series, Red, 12 oz, Can
| Item | Primer |
|---|---|
| Type | High Strength |
| Application | Automotive Chassis, Heavy Industrial Applications Where The Ptfe Additive Acts As An Additional Lubrication Barrier Against Metal-to-Metal Contact, Industrial - Machinery Tools, Overhead Garage Door Channels, Fan Motors, Slides, Gearsmarine - Cables, Couplings, Gears, Hitches, Winchesautomotive - Hinges, Electrical Antennas, Latches, Springs, Coilsresidential - Implements, Door Channels, Slides, Locksfood Service - All Areas Without Direct Food Contact. |
| Color | Red |
| Container Size | 12 fl oz |
| Container Type | Can |
| Materials Bonded | Ceramic, Concrete, Metal, Plastic, Wood |
| Begins to Harden | 15 min |
| Chemical Base | Acrylic |
| Application Temp. Range | 0 to 122 deg F |
| Base Type | Solvent-Based |
| Substrates | Ceramic, Concrete, Metal, Most Plastics, Wood |
| Green Certification or Other Recognition | VOC Levels Meet SCAQMD Requirements |
| Tensile Strength | 167 psi |
| Work Life | 15 min |
| Green Environmental Attribute | Meets SCAQMD Requirements |
| Specific Gravity | 1.345 |
| Shear Strength | 648 psi |
| VOC Content | 0.1% |
| Application Family | General Purpose |
| Adhesive Color | White |
| Bonding Range | 1 to 15 min. |
| Characteristics | Apply to Vertical Surfaces, Fast Set Time, Sandable and Paintable Finish, Shock and Impact Resistant, Water Resistant |
| Standards | AFG-01, ASTM C557, ASTM D3498, HUD UM60a |
| Functional Cure | Not Rated |
| Material | Acrylic |
| Curing Time | 12 hr. |
| Viscosity | 2000 cP |
| Temp. Range | 0 to 122 deg F |
| Features | Apply to Vertical Surfaces, Fast Set Time, Impact Resistant, Shock Resistant |
| Series | Power Grab |
| Solvent-Free | Yes |
| Maximum Performance Temperature | 122 deg F |
| Finishing Features | Paintable, Sandable |
| VOC Content Weight Percentage | 0.1% |
| Working Time | 15 min |
| VOC Content Weight | 27 g/L |
| Interior/Exterior | Exterior, Interior |
| Full Cure Time | 12 hr |
| Application Method | Caulking Gun |
| Primary Applications | General Purpose |
| Non-Sagging | Yes |
| Minimum Viscosity | 2,500,000 cps |
| Minimum Application Temperature | 0 deg F |
| Gap Fill | 1/4 in |
| Maximum Viscosity | 2,500,000 cps |
| Water Resistance | Water-Resistant |
| Maximum Application Temperature | 122 deg F |
| Low Odor | Yes |
| Full Cure | 12 hr |
| Dry Time | 15 min |
| Container Size - Adhesives | 190 mL |
| Container Type - Adhesives | Tube |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |