Remote Ethernet I/O, 8Ai, 2Port Switch, -40 To 75°C
| Mounting | DIN rail or wall |
|---|---|
| Input Impedance | 10M ohms (min.) |
| Time | 474,053 hrs |
| Safety | UL 508 |
| Accuracy | ±0.1% FSR @ 25°C; ±0.3% FSR @ -10 and 60°C; ±0.5% FSR @ -40 and 75°C |
| Type | Differential input |
| Dimensions | 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in) |
| Isolation | 3k VDC or 2k Vrms |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| EMI | EN 55022; EN 61000-3-2; EN 61000-3-3; FCC Part 15, Subpart B, Class A |
| Resolution | 16 bits |
| Analog Inputs | 8 channels |
| Input Range | 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA |
| EMS | EN 55024, EN 61000-4-2, EN 61000-4-3; EN 61000-4-4, EN 61000-4-5, EN 61000-4-6; EN 61000-4-8, EN 61000-4-11 |
| Protection | 1.5 kV magnetic isolation |
| Built-in Resistor for Current Input | 120 ohms |
| Storage temperature | -40 to 85°C |
| I/O Mode | Voltage / Current |
| Altitude | Up to 2,000 m |
| Sampling Rate | All channels: 12 samples/sec; Per channel: 1.5 samples/sec; Only one channel enabled: 12 samples/sec |
| Freefall | IEC 60068-2-32 |
| Operating temperature | Standard Models: -10 to 60°C (14 to 140°F); Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Wiring | I/O cable max. 14 AWG |
| Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, HTTP |
| Shock | IEC 60068-2-27 |
| Database | Telcordia (Bellcore) |
| Ethernet | 2 switched 10/100 Mbps RJ45 ports |
| Power Input | 24 VDC nominal, 12 to 36 VDC |
| Vibration | IEC 60068-2-6 |
| Hazardous Location | UL/cUL Class I Diision 2, ATEX Zone 2 |
| Power Consumption | 121 mA @ 24 VDC |
| Package Quantity | 1 |