VFD, 0.5hp, 0.37kW, 1.2 Amp, 380-480V 3 Phase Input/Output, with LED Keypad and EMC Filter, No Internal Brake Transistor, IP66/NEMA4X Indoor/Outdoor Switched, Frame Size 1: 9.13 x 6.34 x 6.38" (HWD), Optidrive E3 Series

The Optidrive E3 from Invertek is a general purpose sensorless vector drive that is great for most motor types. E3 series, 3 phase rated drives (with the exception of Size 4 IP66/NEMA 4X models) can be derated by 50% for use in single phase power applications. Please see more information under 'Documents'. Invertek offers single phase input drives up to 10 hp, these drives are not derated. This is the most popular, general purpose drive from Invertek Available from 0.5 to 50hp Single and 3 phase input, 110 to 480V models Single phase input models available up to 10hp! Choose from IP20 or IP66/NEMA 4X models Switch between Industrial or Pump & Fan modes Simple set up – just 14 basic parameters and functions Includes models for single phase motors Can be used with all motor types; induction, AC permanent magnet, brushless DC, line start PM, synchronous reluctance Internal Category C1 EMC filter 3 year warranty IP20 (part #'s ending in 2): Available up to 50hp, no disconnect switch Indoor rated 3 phase models can be derated by 50% for use in single phase power applications IP66/NEMA 4X (part #'s ending in A or B): Ending in B is Outdoor, with disconnect switch Ending in A is Outdoor, no disconnect switch Outdoor rated, dust-tight and washdown ready! Please note: For IP66/NEMA 4X three phase input models, chassis size 4 is not capable of being derated for use in applications supplying single phase power to these units. Size 4 chassis use film capacitors which prohibit single phase operation. Single Phase Input/Output: Available from 0.5 to 1,5hp For use on permanent split capacitor (PSC) or shaded pole induction motors These drives end in -01 Higher horsepower 3 phase models can be derated for use in single phase power applications. Switch between industrial mode, pump mode and fan mode 14 parameter basic setup, default settings suitable for most applications Internal Category C1 EMC filter