1/2" Carbide TiN 140 Deg. Jobber Length Drill Bit
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 124 mm |
| Drill Bit Point Angle | 140 Degrees |
| Drill Bit Size | 1/2 in |
| Number of Flutes | 2 |
| Shank Dia. | 12.7 mm |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | EgiAs |
| Shank Type - Machining | Straight |
| Application | For Aluminum : Casting, Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Die Steels : 20 HrC, Hardened Steels : 35 HrC, Hardened Steels : 35-45 HrC, Hardened Steels : 45-50 HrC |
| List Number | 6310 |
| Depth:Dia. Ratio | 5 xD |
| Flute Length | 77 mm |
| Drill Bit Dimension Type | Fractional Inch |
| Drill Bit Grouping | Drill Bit |
| Decimal Equivalent | 0.5 |
| Flute Type | Spiral |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 30 deg |
| Shank Length | 47 mm |
| Primary Material Application | Cast Iron, Steel |
| Measurement System | Fractional Inch |
| Secondary Material Application ISO Code | H, P |
| Maximum Drilling Depth | 77 mm |
| Drill Diameter Tolerance | +0.000/-0.027 mm |
| Material Grade - Machining | High Performance |
| Secondary Material Application | Alloy Steel, Die Steel, Hardened Steel |
| Series | 6310 |
| Primary Material Application ISO Code | P, K |
| Sheeter Drill | No |
| Drill Bit Point Type | R Thinning Point |
| Drill Length Class | Jobber Length |
| Package Quantity | 1 |