Jobber Drill Bit, #31, Carbide
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 1-7/8 in |
| Drill Bit Size | #31 |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 7/8 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.12 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | Bright |
| Depth:Dia. Ratio | 5 xD |
| Cutting Direction | Right Hand |
| Point Type | Four Facet Point |
| Drill Bit Dimension Type | Wire |
| Shank Dia. | #31 |
| Coolant Through | No |
| List Number | 200 |
| Drill Bit Grouping | Drill Bit |
| Depth x Dia. Ratio | 5 xD |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018 |
| Coolant Fed | Non-Coolant Through |
| Material - Machining | Carbide |
| Standards | Not Rated |
| Primary Material Application ISO Code | K, P |
| Flute Type | Straight |
| Finish - Machining | Bright |
| Measurement System | Wire |
| Shank Type - Machining | Straight |
| Primary Material Application | Cast Iron, Steel |
| Shank Length | 25.4 mm |
| Helix Angle | 0 Degrees |
| Series | 200 |
| Drill Diameter Tolerance | +0.000mm/-0.013mm |
| Maximum Drilling Depth | 22.2 mm |
| Drill Length Class | Jobber Length |
| Drill Bit Point Type | 4 Facet Point |
| Aircraft Drill | No |
| Sheeter Drill | No |
| Package Quantity | 1 |