Screw Machine Drill Bit, 7.30 mm Size, 130 Degrees Point Angle, Powdered Metal, V Finish
| Item | Screw Machine Drill Bit |
|---|---|
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Metric |
| Drill Bit Size | 7.3 mm |
| Decimal Equivalent | 0.2874 |
| Drill Bit Point Angle | 130 deg |
| Drill Bit Material | Powdered Metal |
| Drill Bit Finish | V |
| Flute Type | Spiral |
| Shank Dia. | 8 mm |
| Overall Length | 78 mm |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 34 mm |
| Maximum Drilling Depth | 34 mm |
| Point Type | R Thinning |
| Depth:Dia. Ratio | 3 xD |
| Sizes Included | 7.30mm |
| Application | For Drilling Cast Iron, Medium Carbon Steel, High Carbon Steel, Alloy Steel, Die Steel, Titanium Alloys, Nickel Alloys and Hardened Steel Under 45 HrC |
| List Number | 1900 |
| Grade | General Purpose |
| Coolant Through | No |
| Depth x Dia. Ratio | 3 xD |
| Standards | Not Rated |
| Series | EX-Gold VPG GDS |
| Coolant Fed | Non-Coolant Through |
| Drill Length Class | Screw Machine Length |
| Material - Machining | Powdered Metal |
| Primary Material Application | Cast Iron, Hardened Steel, Nickel, Steel, Tool and Die Steel |
| Measurement System | Metric |
| Shank Length | 44 mm |
| Primary Material Application ISO Code | P, K, S, H |
| Secondary Material Application | Titanium, Aluminum, Hardened Steel, Low Carbon Steel, Stainless Steel |
| Drill Bit Point Type | R Thinning Point |
| Finish - Machining | V |
| Secondary Material Application ISO Code | M, N, H, P, S |
| Sheeter Drill | No |
| Drill Diameter Tolerance | +0.000/-0.022mm |
| Web Thinning | R-Thinned |
| Shank Type - Machining | Straight |
| Material Grade - Machining | General Purpose |
| Package Quantity | 1 |