Spiral Flute Tap, Modified Bottoming, 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 74 mm |
| Tap Style | Flute |
| Shank Dia. | 9.7 mm |
| Tap Chamfer | Modified Bottoming |
| Tap Dimension Type | Metric |
| Tap Material | High Speed Steel |
| Tap Size | M10 |
| Number of Flutes | 3 |
| Thread Length | 32 mm |
| Tap Thread Type | Metric Fine |
| Tap Grouping | Tap |
| Tap Thread Size | M10-1.25 |
| Thread Direction | Right Hand |
| Standards | ANSI |
| Tap Finish | Oxide |
| Series | 299 |
| Cutting Direction - Machining | Right Hand |
| Primary Material Application | Steel |
| Material Grade - Machining | 299, Vanadium High Speed Steel |
| Tap Shank Standard | ANSI |
| Coolant Fed | Non-Coolant Through |
| Thread Limit | D5 |
| 75% Thread Drill Size | 0.3438 |
| Extended Neck | Yes |
| Measurement System | Metric |
| Drill Bit Size | 9.03mm, 8.70mm, 8.78mm, 8.86mm, 8.94mm |
| Thread Standard | Metric Fine |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel |
| Features | HSSE material; Spiral Flute; Bright, Steam Oxide surface treatment; OSG V-coating |
| Primary Material Application ISO Code | P |
| Secondary Material Application ISO Code | K, P, M, H |
| Thread Size | M10x1.25 |
| Square Size | 7.26 mm |
| Thread Pitch | 1.25 mm |
| 55% Thread Drill Size | 9.1 mm |
| Shank Type - Machining | Straight |
| 65% Thread Drill Size | 8.9 mm |
| Shank Length | 42 mm |
| Helix Angle | 45 deg |
| Size | M10 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | D10 |
| List Number | 299 |
| Package Quantity | 1 |