Spiral Flute Tap, Modified Bottoming 4 Flutes
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 4-1/4 in |
| Number of Flutes | 4 |
| Tap Material | High Speed Steel |
| Shank Dia. | 0.59 in |
| Tap Style | Flute |
| Tap Chamfer | Modified Bottoming |
| Tap Size | 3/4" |
| Tap Dimension Type | Inch |
| Tap Thread Type | UNF |
| Tap Grouping | Tap |
| Standards | ANSI |
| Thread Length | 2 in |
| Tap Thread Size | 3/4"-16 |
| Thread Direction | Right Hand |
| Tap Finish | Oxide |
| Cutting Direction - Machining | Right Hand |
| Series | 290 |
| 65% Thread Drill Size | 17.7 mm |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel |
| Square Size | 0.442 in |
| Thread Size | 3/4"-16 |
| Material Grade - Machining | 290, Vanadium High Speed Steel |
| Shank Length | 1-13/16 in |
| Thread Standard | UNF |
| Helix Angle | 45 deg |
| Thread Limit | H5 |
| Threads per Inch | 16 |
| Primary Material Application ISO Code | P |
| Coolant Fed | Non-Coolant Through |
| Measurement System | Fractional Inch |
| Drill Bit Size | 0.6851 in, 0.6891 in, 0.6932 in, 0.6972 in, 0.7013 in |
| Tap Shank Standard | ANSI |
| 75% Thread Drill Size | 17.50 |
| Primary Material Application | Steel |
| Features | HSSE, Slow Spiral, Spiral Flute, Steam Oxide Surface Treatment, TiCN Coating |
| Secondary Material Application ISO Code | K, P, M, H |
| Shank Type - Machining | Straight |
| Extended Neck | Yes |
| 55% Thread Drill Size | 17.9 mm |
| Size | 3/4 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H5 |
| List Number | 290 |
| Package Quantity | 1 |