Spiral Point Tap, 7/8"-14, Plug, UNF, 3 Flutes, TiCN
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.987 in |
| Tap Material | Powdered Metal |
| Tap Style | Spiral Point |
| Tap Size | 7/8" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 125 mm |
| Number of Flutes | 3 |
| Tap Grouping | Tap |
| Number of Pieces | 1 |
| Standards | ANSI, DIN |
| List Number | 16515 |
| Thread Length | 1-57/64 in |
| Tap Finish | TiCN |
| Tap Thread Type | UNF |
| Thread Direction | Right Hand |
| Tap Thread Size | 7/8"-14 |
| Pitch Diameter Limit | H6 |
| Cutting Direction - Machining | Right Hand |
| Series | 16515 |
| Square Size | 0.522 in |
| Tap Shank Standard | ANSI |
| Primary Material Application ISO Code | P, M, H |
| Measurement System | Fractional Inch |
| Secondary Material Application | Brass, Bronze, Copper, Cast Iron, Aluminum, Steel |
| Primary Material Application | Hardened Steel, Stainless Steel, Steel |
| Threads per Inch | 14 |
| 55% Thread Drill Size | 20.9 mm |
| Shank Length | 3-1/32 in |
| Coolant Fed | Non-Coolant Through |
| Drill Bit Size | 0.8008 in, 0.8054 in, 0.8101 in, 0.8147 in, 0.8193 in |
| Spiral Direction | Neutral |
| Extended Neck | Yes |
| 65% Thread Drill Size | 13/16 in |
| Thread Size | 7/8"-14 |
| Shank Type - Machining | Straight |
| Thread Limit | H6 |
| Thread Standard | UNF |
| Secondary Material Application ISO Code | P, K, N |
| Tap Length Standard | DIN |
| 75% Thread Drill Size | 20.4 mm |
| Helix Angle | 0 deg |
| Size | 7/8 |
| Package Quantity | 1 |