Taper L Drill Bit, 160.00mm L, 9.50mm dia.
| Item | Taper Length Drill Bit |
|---|---|
| Number of Flutes | 2 |
| Overall Length | 160 mm |
| Flute Length | 105 mm |
| Drill Bit Size | 3/8 in |
| Drill Bit Point Angle | 140 deg |
| Cutting Direction | Right Hand |
| Drill Bit Finish | EgiAs |
| Drill Bit Material | Solid Carbide |
| Shank Dia. | 9.5 mm |
| Decimal Equivalent | 0.375 |
| Application | For Aluminum : 6061, 7071, Aluminum : Casting, Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Die Steels : 20 HrC, Stainless Steels : 300, Stainless Steels : 400, Stainless Steels : 17-4PH, Nickel Alloy: Inconel, Titanium: 6Al4V, Hardened Steels : 35 HrC, Hardened Steels : 35-45 HrC, Hardened Steels : 45-50 HrC |
| Grade | High Performance |
| List Number | 6520 |
| Coolant Through | Yes |
| Depth:Dia. Ratio | 8 xD |
| Drill Bit Dimension Type | Fractional Inch |
| Flute Type | Spiral |
| Point Type | X Thinning |
| Depth x Dia. Ratio | 8 xD |
| Shank Type | Straight |
| Standards | Not Rated |
| Coolant Fed | Coolant Through |
| Helix Angle | 30 Degrees |
| Primary Material Application | Cast Iron, Hardened Steel, Steel, Titanium, Tool and Die Steel |
| Material Grade - Machining | High Performance |
| Primary Material Application ISO Code | P, K, H, S |
| Drill Length Class | Taper Length |
| Series | 6520 |
| Maximum Drilling Depth | 105 mm |
| Number of Coolant Holes | 2 |
| Drill Bit Point Type | X Thinning Point |
| Sheeter Drill | No |
| Secondary Material Application | Nickel, Aluminum, Stainless Steel |
| Secondary Material Application ISO Code | M, N, S |
| Material - Machining | Carbide |
| Measurement System | Fractional Inch |
| Finish - Machining | EgiAs |
| Shank Length | 55 mm |
| Drill Diameter Tolerance | +0.000mm/-0.022mm |
| Shank Type - Machining | Straight |
| Package Quantity | 1 |