Thread Forming Tap, M10-1.50, Modified Bottoming, TiCN, 0 Flutes
| Item | Thread Forming Tap |
|---|---|
| Tap Thread Size | M10-1.50 |
| Tap Chamfer | Modified Bottoming |
| Tap Finish | TiCN |
| Number of Flutes | 0 |
| Number of Pieces | 1 |
| Tap Thread Type | Metric Coarse |
| Pitch Diameter Limit | D6 |
| Thread Direction | Right Hand |
| Tap Grouping | Tap |
| Thread Length | 32 mm |
| Tap Style | Thread Forming |
| Overall Length | 100 mm |
| List Number | 16350 |
| Tap Dimension Type | Metric |
| Tap Size | M10 |
| Shank Dia. | 9.7 mm |
| Tap Material | Cobalt |
| Standards | DIN |
| Cutting Direction - Machining | Right Hand |
| Series | 16350 |
| Secondary Material Application ISO Code | H, S |
| Tap Length Standard | DIN |
| Extended Neck | No |
| Material Grade - Machining | 16350 |
| Tap Shank Standard | ANSI |
| Primary Material Application | Brass, Copper, Bronze, Aluminum, Hardened Steel, Stainless Steel, Steel |
| 55% Thread Drill Size | 9.4 mm |
| Features | 40-50% Less Machining Torque, Fluteless Forming Tap |
| 65% Thread Drill Size | 9.3 mm |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application ISO Code | P, N, M, H |
| Thread Pitch | 1.5 mm |
| Thread Standard | Metric Coarse |
| Shank Length | 61 mm |
| Square Size | 7.26 mm |
| Thread Size | M10x1.5 |
| Thread Limit | D6 |
| Secondary Material Application | Titanium, Nickel, Hardened Steel |
| Class of Fit | 6H |
| 75% Thread Drill Size | 9.2 mm |
| Spiral Direction | Neutral |
| Helix Angle | 0 Degrees |
| Package Quantity | 1 |