Injectible Packing, PTFE, PK10
| Item - Packing Seals | Injectible Packing |
|---|---|
| Length | 8 in |
| Material | PTFE |
| Lubrication - Packing Seals | Yes |
| Max. Pressure for Pumps (PSI) | 80 |
| Max. Pressure for Valves (PSI) | NR |
| Industry - Packing Seals | Chemical, General Service, Waste/Water Treatment |
| For Use In - Packing Seals | Pumps |
| For Use In | Pumps |
| Max. Temp in Steam (F) | 500 |
| pH Range | 2 to 12 |
| Item | Injectible Packing |
| Application | Low Leak, Worn Shafts |
| Type | Pac-King #500 |
| Features | Injectible Packing Is Easy To Maintain |
| Ambient Temp. Range (F) | 500 |
| Color | White |
| Max. Shaft Speed (ft/min) | 1,200 fpm |
| Standards | FDA Approved |
| pH - Maximum | 14 pH |
| Overall Length | Not Applicable |
| pH - Minimum | 0 pH |
| Includes | Lubrication |
| Product Type | Injectable Packing Seal |
| Shaft Speed - Maximum | 1,200 fpm |
| External Coating | Not Applicable |
| Seal Material | PTFE |
| Temperature in Steam - Maximum | 500 deg F |
| Pressure for Pumps - Maximum | 80 psi |
| Ambient Temperature - Maximum | 500 deg F |
| Packing Seal Size | Not Rated |
| Pressure for Valves - Maximum | Not Rated |
| Country of Origin (subject to change) | United States |
| Package Quantity | 10 |