Anaerobic Anaerobic Gasket Maker, 50 mL, Red, Temp Range -65 to 300 Degrees F
| Application | Automobile Motorcycle, Marine and Heavy Duty |
|---|---|
| Color | Red |
| Size | 50 mL |
| Substrates | Aluminum, Brass, Iron, Steel |
| Temp. Range | -65 to 300 deg F |
| For Use On | Aluminum, Iron, and Steel Flanged Mating Surfaces |
| Sealant Container | Tube |
| Item | Anaerobic Gasket Maker |
| Type | Anaerobic |
| Full Cure | 24 hr |
| Begins to Harden | 4 hr |
| Standards | NSF Certified |
| Characteristics | Fills Gaps Up to 0.050 in, Medium Strength, Rapid Cure, Solvent Resistant, Thixotropic Based |
| Specific Gravity | 1.13 |
| Viscosity | paste |
| Flash Point | 200 deg F |
| Container Type | Tube |
| Container Size | 1.69 fl oz |
| Chemical Base | Dimethacrylate Ester |
| Minimum Operating Temperature | -65 deg F |
| Series | Anaerobic Gasket Maker |
| Storage Requirements | 46 Degrees to 82 Degrees F |
| Clean Up Method | Soap and Water |
| Maximum Operating Temperature | 300 deg F |
| Product Form | Gel |
| VOC Content Weight Percentage | 3% |
| Cure Type | Anaerobic |
| Sensor Safe | No |
| Working Time | 4 hr |
| For Material Type | Iron, Brass, Aluminum, Steel |
| Minimum Viscosity | 750,000 cps |
| Maximum Gap Fill Size | 0.05 in |
| Maximum Viscosity | 3,750,000 cps |
| Full Cure Time | 1 day |
| Resistance Properties | Non-Corrosive |
| Sealant Type | Gasket Maker |
| Specific Sealing Application | Flexible Assemblies |
| Properties | Standard |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |