High-performance stepper motor offers superior performance, high torque, low vibration and low noise. Basic step angle is 0.72º (500 steps per rev)Encoder Model - TTLEncoder cable required for connection (see Accessories)DC Driver input type motor only
| Holding Torque | 0.24 N*m |
|---|---|
| Step Angle | 0.72 deg |
| Motor Frame Size | 1.65″ |
| Input Current | 0.75 A/phase |
| Input Voltage | 5 V |
| frame size | 42 mm |
| frame size(imperial) | 1.65 in |
| motor length | 47 mm |
| motor length(imperial) | 1.85 in. |
| basic step angle | 0.72º |
| holding torque(imperial) | 34 oz-in |
| current per phase | 0.75 A/phase |
| type | Standard |
| shaft/gear type | Round Shaft (No Gearhead) |
| gear type | No Gearhead |
| motor connection type | Flying Leads |
| shaft | Single |
| connection type | New Pentagon (Bipolar) |
| lead wires | 5 |
| rotor inertia | 68x10 -7 kg·m² |
| rotor inertia(imperial) | 0.37 oz-in² |
| rohs compliant | Yes |
| insulation resistance | 100 MΩ minimum under normal temperature and humidity, when measured by a 500 VDC megger between the windings and the motor casing. |
| dielectric strength | Sufficient to withstand 1.0 kV, 50 Hz or 60 Hz applied for one minute between the windings and casing, under normal temperature and humidity. |
| temperature rise | Temperature rise of the coil measured by the Change Resistance Method is 144ºF (80ºC) or less (at rated current, at standstill, five phases energized). |
| insulation class | Class B [266ºF (130ºC)] |
| ambient temperature range | 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) |
| ambient humidity | 85% or less (noncondensing) |
| shaft runout | 0.002 in. (0.05 mm) T.I.R. at top of output shaft |
| concentricity | 0.003 in. (0.075 mm) T.I.R. |
| perpendicularity | 0.003 in. (0.075 mm) T.I.R. |
| radial play | 0.001 in. (0.025 mm) max. of 1.12 lb. (5 N) |
| axial play | 0.003 in. (0.075 mm) max. of 2.2 lb. (10 N) |
| radial load | 0 mm from Shaft End = 20 N 5 mm from Shaft End = 25 N 10 mm from Shaft End = 34 N 15 mm from Shaft End = 52 N |
| radial load(imperial) | 0 in. from Shaft End = 4.5 lb 0.2 in. from Shaft End = 5.6 lb 0.39 in. from Shaft End = 7.6 lb 0.59 in. from Shaft End = 11.7 lb |
| axial load | 10 N |
| axial load(imperial) | 2.2 lb |
| encoder type | Incremental |
| output | 2-Channel A, B |
| input current (ma) | 55 (Typ.) |
| input voltage (v) | 5 |
| output type | TTL |
| output voltage (low) | 0.5 VDC, 8 mA |
| output voltage (high) | 2.0 VDC, -8 mA |
| response frequency (khz) | 300 (Max.) |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PK545NAW-R17 |
| Lead Time | Oriental Motor's lead time is characterized by best in class, with any of our catalog products available to ship in 3 to 9 business days (for orders placed before 12pm PST). |