The PKE series hybrid stepper motors are designed to provide high performance and energy savings. To achieve constant maximum torque output with lower heat generation and save energy, the motor losses have been substantially reduced allowing them to be operated for longer hours at high speed which is not possible with conventional stepper motors. For use with RKII Series Drivers.Constant DutyLow Noise, Low Vibration
| Holding Torque | 6.3 N*m |
|---|---|
| Step Angle | 0.72 deg |
| Motor Frame Size | 85 mm |
| Input Current | 0.75 A |
| Input Voltage | 5 VDC ±10% |
| Integrated Brake | Not Equipped |
| frame size | 85 mm |
| frame size(imperial) | 3.35 in |
| motor length | 128 mm |
| motor length(imperial) | 5.04 in. |
| holding torque(imperial) | 890 oz-in |
| type | Standard |
| shaft/gear type | Round Shaft with Flat (No Gearhead) |
| encoder | Equipped |
| shaft | Single |
| electromagnetic brake | Not Equipped |
| power input | AC |
| current | 0.75 A |
| basic step angle | 0.72º |
| rotor inertia | 3300x10 -7 kg·m² |
| rotor inertia(imperial) | 18.1 oz-in² |
| permissible overhung load | 0 mm from Shaft End = 260 N 5 mm from Shaft End = 290 N 10 mm from Shaft End = 340 N 15 mm from Shaft End = 390 N 20 mm from Shaft End = 480 N |
| permissible overhung load(imperial) | 0 in. from Shaft End = 58 lb 0.2 in. from Shaft End = 65 lb 0.39 in. from Shaft End = 76 lb 0.59 in. from Shaft End = 87 lb 0.79 in. from Shaft End = 108 lb |
| permissible thrust load | 40.20 N |
| permissible thrust load(imperial) | 9 lb |
| rohs compliant | Yes |
| safety standards | UL CE |
| ce marking | Low Voltage Directives EMC Directives |
| radial play | 0.001 inch (0.025 mm) max. of 1.12 lb. (5 N) |
| axial play | 0.003 in (0.075 mm) max. of 2.2 lb. (10 N) |
| encoder type | Incremental |
| output | 3-Channel A, B, Index |
| input current (ma) | 40 mA |
| input voltage (v) | 5 VDC ±10% |
| output type | Line Driver |
| insulation resistance (motor) | 100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor windings |
| dielectric strength (motor) | Sufficient to withstand the following for 1 minute: Case - Motor windings 1.5 kVAC 50 Hz or 60 Hz |
| degree of protection | IP20 |
| ambient temperature range | +14 ~ +122ºF (-10 ~ +50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| operating atmosphere | No corrosive gases, dust. Avoid contact with water or oil. |
| temperature rise | Temperature rise of the windings is 144ºF (80ºC) or less. Measured at rated current, at standstill, five phases energized measured (by resistance change method). |
| shaft runout | 0.002 in (0.05 mm) T.I.R. |
| concentricity | 0.003 in. (0.075 mm) T.I.R. |
| perpendicularity | 0.003 in. (0.075 mm) T.I.R. |
| stop position accuracy | ±5 arc minutes (±0.084º) |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKE5913RC2 |
| Lead Time | Estimated Ship: 10/29/2024 |