The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.
- Bipolar Winding
Especificaciones
- Holding Torque: 0.036Â N*m
- Step Angle: 1.8Â deg
- Motor Frame Size: 20Â mm
- Input Current: 0.6Â A/phase
- Input Voltage: 3.9Â V
- Shaft Diameter: 4Â mm
- basic step angle: 1.8º
- type: Standard
- frame size: 20 mm
- frame size(imperial): 0.79 in
- motor length: 40 mm
- motor length(imperial): 1.57 in.
- holding torque(imperial): 5.1 oz-in
- current per phase: 0.6 A/phase
- voltage (vdc): 3.9
- resistance (ω/phase): 6.5
- inductance (mh/phase): 3.5
- motor connection type: Lead Wire
- connection type: Bipolar
- shaft/gear type: Round Shaft with Flat (No Gearhead)
- output shaft: Metric
- output shaft diameter: 4 mm
- shaft: Double
- lead wires: 4
- rotor inertia: 2.9x10 -7 kg·m²
- rotor inertia(imperial): 0.0159 oz-in²
- rohs compliant: Yes
- insulation class: Class B [266ºF (130ºC)]
- insulation resistance: 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity.
- dielectric strength: Sufficient to withstand 0.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity.
- temperature rise: Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized)
- ambient temperature range: 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing)
- ambient humidity: 85% or less (Non-Condensing)
- shaft runout: 0.05 mm (0.002 in.) T.I.R.
- step accuracy: ±5 arc minutes (±0.083º)
- radial load: 0 mm from Shaft End = 12 N 5 mm from Shaft End = 15 N
- radial load(imperial): 0 in. from Shaft End = 2.7 lb 0.2 in. from Shaft End = 3.3 lb
- axial load: 3 N
- axial load(imperial): 0.67 lb
- radial play: 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.)
- axial play: 0.075 mm (0.003 in.) maximum of 1 N (0.225 lb.)
- concentricity: 0.075 mm (0.003 in.) T.I.R.
- perpendicularity: 0.075 mm (0.003 in.) T.I.R.
- Unidad: piece
- Cantidad mínima: 1
- Incremento de cantidad: 1
- Fabricante: Oriental Motor
- Vendor SKU: PKP214D06B
- Lead Time: Estimated Ship: 10/22/2024
| Holding Torque | 0.036Â N*m |
|---|---|
| Step Angle | 1.8Â deg |
| Motor Frame Size | 20Â mm |
| Input Current | 0.6Â A/phase |
| Input Voltage | 3.9Â V |
| Shaft Diameter | 4Â mm |
| basic step angle | 1.8º |
| type | Standard |
| frame size | 20 mm |
| frame size(imperial) | 0.79 in |
| motor length | 40 mm |
| motor length(imperial) | 1.57 in. |
| holding torque(imperial) | 5.1 oz-in |
| current per phase | 0.6 A/phase |
| voltage (vdc) | 3.9 |
| resistance (ω/phase) | 6.5 |
| inductance (mh/phase) | 3.5 |
| motor connection type | Lead Wire |
| connection type | Bipolar |
| shaft/gear type | Round Shaft with Flat (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 4 mm |
| shaft | Double |
| lead wires | 4 |
| rotor inertia | 2.9x10 -7 kg·m² |
| rotor inertia(imperial) | 0.0159 oz-in² |
| rohs compliant | Yes |
| insulation class | Class B [266ºF (130ºC)] |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 0.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| step accuracy | ±5 arc minutes (±0.083º) |
| radial load | 0 mm from Shaft End = 12 N 5 mm from Shaft End = 15 N |
| radial load(imperial) | 0 in. from Shaft End = 2.7 lb 0.2 in. from Shaft End = 3.3 lb |
| axial load | 3 N |
| axial load(imperial) | 0.67 lb |
| radial play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| axial play | 0.075 mm (0.003 in.) maximum of 1 N (0.225 lb.) |
| concentricity | 0.075 mm (0.003 in.) T.I.R. |
| perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP214D06B |
| Lead Time | Estimated Ship: 10/22/2024 |