The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.
- Bipolar Winding
- Motor and Encoder cables required (*sold separately)
Especificaciones
- Holding Torque: 0.086Â N*m
- Step Angle: 0.9Â deg
- Motor Frame Size: 28Â mm
- Input Current: 1.5Â A/phase
- Input Voltage: 1.77Â V
- Shaft Diameter: 5Â mm
- basic step angle: 0.9º
- type: High-Resolution
- frame size: 28 mm
- frame size(imperial): 1.1 in
- motor length: 47.5 mm
- motor length(imperial): 1.87 in.
- holding torque(imperial): 12.2 oz-in
- current per phase: 1.5 A/phase
- voltage (vdc): 1.77
- resistance (ω/phase): 1.18
- inductance (mh/phase): 1.3
- motor connection type: Connector
- connection type: Bipolar
- shaft/gear type: Round Shaft with Flat (No Gearhead)
- output shaft: Metric
- output shaft diameter: 5 mm
- shaft: Single
- lead wires: 4
- rotor inertia: 9.5x10 -7 kg·m²
- rotor inertia(imperial): 0.052 oz-in²
- insulation class: Class B [266ºF (130ºC)]
- insulation resistance: 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity.
- dielectric strength: No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. : 0.5 kVAC 50/60 Hz
- temperature rise: Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized)
- ambient temperature range: 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing)
- ambient humidity: 85% or less (Non-Condensing)
- shaft runout: 0.05 mm (0.002 in.) T.I.R.
- step accuracy: ±3 arc minutes (±0.05º)
- radial load: 0 mm from Shaft End = 25 N 5 mm from Shaft End = 34 N 10 mm from Shaft End = 52 N
- radial load(imperial): 0 in. from Shaft End = 5.6 lb 0.2 in. from Shaft End = 7.6 lb 0.39 in. from Shaft End = 11.7 lb
- axial load: 5 N
- axial load(imperial): 1.1 lb
- radial play: 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.)
- axial play: 0.075 mm (0.003 in.) maximum of 2.5 N (0.563 lb.)
- concentricity: 0.075 mm (0.003 in.) T.I.R.
- perpendicularity: 0.075 mm (0.003 in.) T.I.R.
- encoder type: Incremental
- output: 3-Channel A, B, Z
- input current (ma): 30 mA max.
- input voltage (v): 5 ±10%
- output type: Line Driver
- Unidad: piece
- Cantidad mínima: 1
- Incremento de cantidad: 1
- Fabricante: Oriental Motor
- Vendor SKU: PKP223MD15A-R3FL
- Lead Time: Estimated Ship: 10/29/2024
| Holding Torque | 0.086Â N*m |
|---|---|
| Step Angle | 0.9Â deg |
| Motor Frame Size | 28Â mm |
| Input Current | 1.5Â A/phase |
| Input Voltage | 1.77Â V |
| Shaft Diameter | 5Â mm |
| basic step angle | 0.9º |
| type | High-Resolution |
| frame size | 28 mm |
| frame size(imperial) | 1.1 in |
| motor length | 47.5 mm |
| motor length(imperial) | 1.87 in. |
| holding torque(imperial) | 12.2 oz-in |
| current per phase | 1.5 A/phase |
| voltage (vdc) | 1.77 |
| resistance (ω/phase) | 1.18 |
| inductance (mh/phase) | 1.3 |
| motor connection type | Connector |
| connection type | Bipolar |
| shaft/gear type | Round Shaft with Flat (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 5 mm |
| shaft | Single |
| lead wires | 4 |
| rotor inertia | 9.5x10 -7 kg·m² |
| rotor inertia(imperial) | 0.052 oz-in² |
| insulation class | Class B [266ºF (130ºC)] |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. : 0.5 kVAC 50/60 Hz |
| temperature rise | Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized) |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| step accuracy | ±3 arc minutes (±0.05º) |
| radial load | 0 mm from Shaft End = 25 N 5 mm from Shaft End = 34 N 10 mm from Shaft End = 52 N |
| radial load(imperial) | 0 in. from Shaft End = 5.6 lb 0.2 in. from Shaft End = 7.6 lb 0.39 in. from Shaft End = 11.7 lb |
| axial load | 5 N |
| axial load(imperial) | 1.1 lb |
| radial play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| axial play | 0.075 mm (0.003 in.) maximum of 2.5 N (0.563 lb.) |
| concentricity | 0.075 mm (0.003 in.) T.I.R. |
| perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| encoder type | Incremental |
| output | 3-Channel A, B, Z |
| input current (ma) | 30 mA max. |
| input voltage (v) | 5 ±10% |
| output type | Line Driver |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP223MD15A-R3FL |
| Lead Time | Estimated Ship: 10/29/2024 |