The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.![]()
- Motor cable required* (sold separately)
Especificaciones
- Holding Torque: 0.097Â N*m
- Step Angle: 1.8Â deg
- Motor Frame Size: 28Â mm
- Input Current: 0.67 [Bipolar (Series)] 0.95 [Unipolar]
- Input Voltage: 4.6 [Bipolar (Series)] 3.2 [Unipolar]
- Integrated Brake: Not Equipped
- product line: VEXTA®
- motor type: 2-Phase
- basic step angle: 1.8º
- frame size: 28 mm
- frame size(imperial): 1.1 in
- motor length: 40 mm
- motor length(imperial): 1.57 in.
- motor connection type: Connector
- holding torque(imperial): 13.7 oz-in
- current per phase (a/phase): 0.67 [Bipolar (Series)] 0.95 [Unipolar]
- voltage (vdc): 4.6 [Bipolar (Series)] 3.2 [Unipolar]
- resistance (ω/phase): 6.8 [Bipolar (Series)] 3.4 [Unipolar]
- inductance (mh/phase): 4.8 [Bipolar (Series)] 1.2 [Unipolar]
- shaft/gear type: Round Shaft with Flat (No Gearhead)
- shaft: Single
- power input: DC
- encoder: Not Equipped
- electromagnetic brake: Not Equipped
- connection type: Bipolar (Series) Unipolar
- lead wires: 6
- rotor inertia: 12x10 -7 kg·m²
- rotor inertia(imperial): 0.07 oz-in²
- rohs compliant: These products do not contain substances that exceed the regulation values in the RoHS Directive.
- insulation class: Class B [266ºF (130ºC)]
- insulation resistance: 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity.
- dielectric strength: Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity.
- temperature rise: Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized)
- ambient temperature range: 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing)
- ambient humidity: 85% or less (Non-Condensing)
- shaft runout: 0.05 mm (0.002 in.) T.I.R.
- stop position accuracy: ±3 arc minutes (±0.05º)
- radial load: 0 mm from Shaft End = 25 N 5 mm from Shaft End = 34 N 10 mm from Shaft End = 52 N
- radial load(imperial): 0 in. from Shaft End = 5.6 lb 0.2 in. from Shaft End = 7.6 lb 0.39 in. from Shaft End = 11.7 lb
- radial play: 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.)
- axial play: 0.075 mm (0.003 in.) maximum of 2.5 N (0.56 lb.)
- concentricity: 0.075 mm (0.003 in.) T.I.R.
- perpendicularity: 0.075 mm (0.003 in.) T.I.R.
- permissible thrust load: The permissible thrust load shall be no greater than the motor mass.
- Unidad: piece
- Cantidad mínima: 1
- Incremento de cantidad: 1
- Fabricante: Oriental Motor
- Vendor SKU: PKP224U09A
- Lead Time: Estimated Ship: 10/22/2024 This Item cannot be cancelled or returned.
| Holding Torque | 0.097Â N*m |
|---|---|
| Step Angle | 1.8Â deg |
| Motor Frame Size | 28Â mm |
| Input Current | 0.67 [Bipolar (Series)] 0.95 [Unipolar] |
| Input Voltage | 4.6 [Bipolar (Series)] 3.2 [Unipolar] |
| Integrated Brake | Not Equipped |
| product line | VEXTA® |
| motor type | 2-Phase |
| basic step angle | 1.8º |
| frame size | 28 mm |
| frame size(imperial) | 1.1 in |
| motor length | 40 mm |
| motor length(imperial) | 1.57 in. |
| motor connection type | Connector |
| holding torque(imperial) | 13.7 oz-in |
| current per phase (a/phase) | 0.67 [Bipolar (Series)] 0.95 [Unipolar] |
| voltage (vdc) | 4.6 [Bipolar (Series)] 3.2 [Unipolar] |
| resistance (ω/phase) | 6.8 [Bipolar (Series)] 3.4 [Unipolar] |
| inductance (mh/phase) | 4.8 [Bipolar (Series)] 1.2 [Unipolar] |
| shaft/gear type | Round Shaft with Flat (No Gearhead) |
| shaft | Single |
| power input | DC |
| encoder | Not Equipped |
| electromagnetic brake | Not Equipped |
| connection type | Bipolar (Series) Unipolar |
| lead wires | 6 |
| rotor inertia | 12x10 -7 kg·m² |
| rotor inertia(imperial) | 0.07 oz-in² |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| insulation class | Class B [266ºF (130ºC)] |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized) |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| stop position accuracy | ±3 arc minutes (±0.05º) |
| radial load | 0 mm from Shaft End = 25 N 5 mm from Shaft End = 34 N 10 mm from Shaft End = 52 N |
| radial load(imperial) | 0 in. from Shaft End = 5.6 lb 0.2 in. from Shaft End = 7.6 lb 0.39 in. from Shaft End = 11.7 lb |
| radial play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| axial play | 0.075 mm (0.003 in.) maximum of 2.5 N (0.56 lb.) |
| concentricity | 0.075 mm (0.003 in.) T.I.R. |
| perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| permissible thrust load | The permissible thrust load shall be no greater than the motor mass. |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP224U09A |
| Lead Time | Estimated Ship: 10/22/2024 This Item cannot be cancelled or returned. |