The high-torque PKP series 2-phase bipolar stepper motor provide high torque, low vibration and low noise.Flat Connector typeBipolar WindingMotor cable required* (sold separately)
| Holding Torque | 2.4 N*m |
|---|---|
| Step Angle | 1.8 deg |
| Motor Frame Size | 51 mm |
| Input Current | 2.3 A/phase |
| Input Voltage | 1.4 V |
| basic step angle | 1.8º |
| type | Geared |
| frame size | 51 mm |
| frame size(imperial) | 2 in |
| motor length | 29.5 mm |
| motor length(imperial) | 1.16 in. |
| holding torque(imperial) | 339 oz-in |
| current per phase | 2.3 A/phase |
| voltage (vdc) | 1.4 |
| resistance (ω/phase) | 0.61 |
| inductance (mh/phase) | 0.53 |
| motor connection type | Flat Connector |
| connection type | Bipolar |
| shaft/gear type | Flat Harmonic Gear |
| gear ratio (x:1) | 100 :1 |
| lost motion | 1.5 arcmin or less (± 0.78 N•m) |
| shaft | Single |
| lead wires | 4 |
| rotor inertia | 17x10 -7 kg·m² |
| rotor inertia(imperial) | 0.092 oz-in² |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| insulation class | 130 (B) |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 0.5 kVAC 50/60 Hz |
| temperature rise | Winding temperature rise 144ºF (80ºC) max. |
| ambient temperature range | 32 ~ 104ºF (0 ~ 40ËšC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| axial load | 200 N |
| axial load(imperial) | 45 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP242D23A2-H100 |
| Lead Time | Estimated Ship: 10/29/2024 |