Incorporating the SH gears with high permissible torque delivers high resolution, high torque and smooth low-speed rotation.Flat Connector typeBipolar windingMotor cable required* (sold separately)
| Holding Torque | 0.4 N*m |
|---|---|
| Step Angle | 0.25 deg |
| Motor Frame Size | 42 mm |
| Input Current | 2.3 A/phase |
| Input Voltage | 0.87 V |
| Shaft Diameter | 5 mm |
| basic step angle | 1.8º |
| type | Geared |
| frame size | 42 mm |
| frame size(imperial) | 1.65 in |
| motor length | 59 mm |
| motor length(imperial) | 2.32 in. |
| holding torque(imperial) | 56 oz-in |
| current per phase | 2.3 A/phase |
| voltage (vdc) | 0.87 |
| resistance (ω/phase) | 0.38 |
| inductance (mh/phase) | 0.41 |
| motor connection type | Flat Connector |
| connection type | Bipolar |
| shaft/gear type | Spur Gear (Offset Shaft) |
| gear ratio (x:1) | 7.2 :1 |
| output shaft | Metric |
| output shaft diameter | 5 mm |
| backlash | 60 arc min (1°) |
| shaft | Double |
| lead wires | 4 |
| rotor inertia | 36x10 -7 kg·m² |
| rotor inertia(imperial) | 0.197 oz-in² |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| insulation class | 130 (B) |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 0.5 kVAC 50/60 Hz |
| temperature rise | Winding temperature rise 144ºF (80ºC) max. |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| step accuracy | ±3 arc minutes (±0.05º) |
| radial load | 0 mm from Shaft End = 10 N 5 mm from Shaft End = 15 N 10 mm from Shaft End = 20 N 15 mm from Shaft End = 30 N |
| radial load(imperial) | 0 in. from Shaft End = 2.2 lb 0.2 in. from Shaft End = 3.3 lb 0.39 in. from Shaft End = 4.5 lb 0.59 in. from Shaft End = 6.7 lb |
| axial load | 15 N |
| axial load(imperial) | 3.3 lb |
| radial play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| axial play | 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
| concentricity | 0.075 mm (0.003 in.) T.I.R. |
| perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP243D23B2-SG7.2 |
| Lead Time | Estimated Ship: 10/29/2024 |