The high-torque PKP series 2-phase bipolar stepper motor provide high torque, low vibration and low noise.Flat Connector typeBipolar WindingMotor cable required* (sold separately)
| Holding Torque | 0.82 N*m |
|---|---|
| Step Angle | 0.9 deg |
| Motor Frame Size | 42 mm |
| Input Current | 1.5 |
| Input Voltage | 3.9 V |
| Shaft Diameter | 5 mm |
| Integrated Brake | Not Equipped |
| motor type | 2-Phase |
| basic step angle | 0.9º |
| frame size | 42 mm |
| frame size(imperial) | 1.65 in |
| motor length | 72.5 mm |
| motor length(imperial) | 2.85 in. |
| holding torque(imperial) | 116 oz-in |
| current per phase (a/phase) | 1.5 |
| voltage (vdc) | 3.9 |
| resistance (ω/phase) | 2.6 |
| inductance (mh/phase) | 9 |
| motor connection type | Flat Connector |
| connection type | Bipolar |
| shaft/gear type | Round Shaft with Flat (No Gearhead) |
| output shaft diameter | 5 mm |
| shaft | Double |
| encoder | Not Equipped |
| electromagnetic brake | Not Equipped |
| lead wires | 4 |
| rotor inertia | 116x10 -7 kg·m² |
| rotor inertia(imperial) | 0.64 oz-in² |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| insulation class | 130 (B) |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 0.5 kVAC 50/60 Hz |
| temperature rise | Winding temperature rise 144ºF (80ºC) max. |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| stop position accuracy | ±3 arc minutes (±0.05º) |
| radial load | 0 mm from Shaft End = 35 N 5 mm from Shaft End = 44 N 10 mm from Shaft End = 58 N 15 mm from Shaft End = 85 N |
| radial load(imperial) | 0 in. from Shaft End = 7.8 lb 0.2 in. from Shaft End = 9.9 lb 0.39 in. from Shaft End = 13 lb 0.59 in. from Shaft End = 19.1 lb |
| axial load | 15 N |
| axial load(imperial) | 3.3 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP246MD15B2 |
| Lead Time | Estimated Ship: 10/22/2024 |