Incorporating the SH gears with high permissible torque delivers high resolution, high torque and smooth low-speed rotation.Bipolar windingMotor cable required* (sold separately)
| Holding Torque | 2.5 N*m |
|---|---|
| Step Angle | 0.2 deg |
| Motor Frame Size | 60 mm |
| Input Current | 1.4 A/phase |
| Input Voltage | 3.08 V |
| Shaft Diameter | 8 mm |
| basic step angle | 1.8º |
| motor connection type | Connector |
| connection type | Bipolar |
| type | Geared |
| frame size | 60 mm |
| frame size(imperial) | 2.36 in |
| motor length | 78.50 mm |
| motor length(imperial) | 3.09 in. |
| holding torque(imperial) | 350 oz-in |
| current per phase | 1.4 A/phase |
| voltage (vdc) | 3.08 |
| resistance (ω/phase) | 2.2 |
| inductance (mh/phase) | 4.5 |
| shaft/gear type | Spur Gear (Offset Shaft) |
| gear ratio (x:1) | 9 :1 |
| output shaft | Metric |
| output shaft diameter | 8 mm |
| backlash | 2 arc min (0.034º) |
| shaft | Single |
| lead wires | 4 |
| rotor inertia | 120x10 -7 kg·m² |
| rotor inertia(imperial) | 0.66 oz-in² |
| rohs compliant | Yes |
| insulation class | Class B [266ºF (130ºC)] |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| stop position accuracy | ±3 arc minutes (±0.05º) |
| radial load | 0 mm from Shaft End = 30 N 5 mm from Shaft End = 40 N 10 mm from Shaft End = 50 N 15 mm from Shaft End = 60 N 20 mm from Shaft End = 70 N |
| radial load(imperial) | 0 in. from Shaft End = 6.7 lb 0.2 in. from Shaft End = 9 lb 0.39 in. from Shaft End = 11.2 lb 0.59 in. from Shaft End = 13.5 lb 0.79 in. from Shaft End = 15.7 lb |
| axial load | 30 N |
| axial load(imperial) | 6.7 lb |
| radial play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| axial play | 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
| concentricity | 0.075 mm (0.003 in.) T.I.R. |
| perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP264D14A-SG9 |
| Lead Time | Oriental Motor's lead time is characterized by best in class, with any of our catalog products available to ship in 3 to 9 business days (for orders placed before 12pm PST). |