The high-torque PKP series 2-phase bipolar stepper motor provide high torque, low vibration and low noise.Flat Connector typeBipolar WindingMotor cable required* (sold separately)
| Holding Torque | 0.74 N*m |
|---|---|
| Step Angle | 1.8 deg |
| Motor Frame Size | 56.4 mm |
| Input Current | 2.8 A/phase |
| Input Voltage | 1.6 V |
| Shaft Diameter | 8 mm |
| basic step angle | 1.8º |
| motor connection type | Flat Connector |
| connection type | Bipolar |
| type | High-Torque |
| frame size | 56.4 mm |
| frame size(imperial) | 2.22 in |
| motor length | 39 mm |
| motor length(imperial) | 1.54 in. |
| holding torque(imperial) | 105 oz-in |
| current per phase | 2.8 A/phase |
| voltage (vdc) | 1.6 |
| resistance (ω/phase) | 0.57 |
| inductance (mh/phase) | 1.5 |
| shaft/gear type | Round Shaft with Flat (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 8 mm |
| shaft | Single |
| lead wires | 4 |
| rotor inertia | 270x10 -7 kg·m² |
| rotor inertia(imperial) | 1.48 oz-in² |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| insulation class | 130 (B) |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1.0 kVAC 50/60 Hz |
| temperature rise | Winding temperature rise 144ºF (80ºC) max. |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| stop position accuracy | ±3 arc minutes (±0.05º) |
| radial load | 0 mm from Shaft End = 90 N 5 mm from Shaft End = 100 N 10 mm from Shaft End = 130 N 15 mm from Shaft End = 180 N 20 mm from Shaft End = 270 N |
| radial load(imperial) | 0 in. from Shaft End = 20 lb 0.2 in. from Shaft End = 22 lb 0.39 in. from Shaft End = 29 lb 0.59 in. from Shaft End = 40 lb 0.79 in. from Shaft End = 60 lb |
| axial load | 30 N |
| axial load(imperial) | 6.7 lb |
| radial play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| axial play | 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
| concentricity | 0.075 mm (0.003 in.) T.I.R. |
| perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| brake type | Power Off Activated Type |
| brake power supply | 24 VDC ± 5% |
| excitation current | 0.23 |
| static friction torque | 0.8 N·m |
| static friction torque(imperial) | 7.08 lb-in |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP264D28M2 |
| Lead Time | Estimated Ship: 10/29/2024 |