The PKP Series 2-phase stepper motor with PLE Plantary Gear from Neugart is notably light, extremely powerful, yet suitable for complex production cycles due to its low-friction bearing design and optimized lubrication.Bipolar Winding
| Holding Torque | 120 N*m |
|---|---|
| Step Angle | 1.8 deg |
| Motor Frame Size | 85 mm |
| Input Current | 4.5 |
| Input Voltage | 3.5 V |
| Shaft Diameter | 20 mm |
| motor type | 2-Phase |
| basic step angle | 1.8º |
| frame size | 85 mm |
| frame size(imperial) | 3.35 in |
| motor length | 245 mm |
| motor length(imperial) | 9.66 in. |
| holding torque(imperial) | 16992 oz-in |
| current per phase (a/phase) | 4.5 |
| voltage (vdc) | 3.5 |
| resistance (ω/phase) | 0.78 |
| inductance (mh/phase) | 6.9 |
| shaft/gear type | Planetary Gear |
| gear ratio (x:1) | 20 :1 |
| output shaft | Metric |
| output shaft diameter | 20 mm |
| shaft | Single |
| motor connection type | Lead Wire |
| connection type | Bipolar |
| lead wires | 4 |
| rotor inertia | 3400x10 -7 kg·m² |
| rotor inertia(imperial) | 18.6 oz-in² |
| insulation class | Class B [266ºF (130ºC)] |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| stop position accuracy | ±3 arc minutes (±0.05º) |
| radial load | Center of Shaft = 1250 N |
| radial load(imperial) | Center of shaft = 281.25 lb |
| axial load | 1600 N |
| axial load(imperial) | 360 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP2913D45A / PLE80-20B / P00029 |
| Lead Time | Oriental Motor's lead time is characterized by best in class, with any of our catalog products available to ship in 3 to 9 business days (for orders placed before 12pm PST). |