The PKP Series 5-phase stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72º (500 steps per rev).Motor and encoder cables required for connection (see Accessories)DC Driver input type motor only
| Holding Torque | 2.1 N*m |
|---|---|
| Step Angle | 0.72 deg |
| Motor Frame Size | 60 mm |
| Input Current | 2.4 A/phase |
| Input Voltage | DC 5 V |
| Shaft Diameter | 8 mm |
| frame size | 60 mm |
| frame size(imperial) | 2.36 in |
| output shaft | Metric |
| output shaft diameter | 8 mm |
| motor length | 101 mm |
| motor length(imperial) | 3.98 in. |
| basic step angle | 0.72º |
| holding torque(imperial) | 290 oz-in |
| current per phase | 2.4 A/phase |
| type | High-Torque |
| shaft/gear type | Round Shaft with Flat (No Gearhead) |
| gear type | No Gearhead |
| motor connection type | Flat Connector |
| shaft | Single |
| connection type | New Pentagon (Bipolar) |
| lead wires | 5 |
| rotor inertia | 540x10 -7 kg·m² |
| rotor inertia(imperial) | 3 oz-in² |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| dielectric strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1 kVAC 50/60 Hz |
| temperature rise | Winding temperature rise 144ºF (80ºC) max. |
| insulation class | 130 (B) |
| ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| shaft runout | 0.05 mm (0.002 in.) T.I.R. |
| concentricity | 0.075 mm (0.003 in.) T.I.R. |
| perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| radial play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| axial play | 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
| radial load | 0 mm. from Shaft End = 90 N 5 mm from Shaft End = 100 N 10 mm from Shaft End = 130 N 15 mm from Shaft End = 180 N 20 mm from Shaft End = 270 N |
| radial load(imperial) | 0 in. from Shaft End = 20 lb 0.2 in. from Shaft End = 22 lb 0.39 in. from Shaft End = 29 lb 0.59 in. from Shaft End = 40 lb 0.79 in. from Shaft End = 60 lb |
| axial load | 30 N |
| axial load(imperial) | 6.7 lb |
| encoder resolution | 500 P/R |
| output type | Line Driver |
| encoder type | Incremental |
| output | 3-Channel |
| input current (ma) | 30 mA max. |
| input voltage (v) | 5 VDC |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | PKP569FN24A2-R3GL |
| Lead Time | Estimated Ship: 10/29/2024 |