T92S11D12-24 significa que el producto es un interruptor de encendido/apagado de 12 V, con un diámetro de 9.2 mm y una longitud de 24 mm.
| Width | 34.5 mm [ 1.359 in ] |
|---|---|
| Contact Material | AgCdO |
| Length | 52.3 mm [ 2.059 in ] |
| Height | 30.7 mm [ 1.209 in ] |
| Coil Magnetic System | Monostable, DC |
| Insulation Initial Dielectric Between Open Contacts (Vrms) | 1,500 |
| Insulation Creepage Between Contact and Coil | 9.5 mm [ .374 in ] |
| Product Type | Relay |
| Contact Voltage Rating (VAC) | 277 |
| Insulation Clearance Between Contact and Coil | 8 mm [ .315 in ] |
| Coil Power Rating (DC) (mW) | 1,700 |
| Contact Number of Poles | 2 |
| Terminal Type | PCB-THT |
| Insulation Initial Dielectric Between Adjacent Contacts (Vrms) | 2,000 |
| Mounting Type | Printed Circuit Board |
| Coil Power Rating Class | >1.5W |
| Contact Current Rating (A) | 30 |
| Coil Special Features | UL Coil Insulation Class F |
| Coil Resistance (Ω) | 350 |
| Contact Switching Voltage (Max) (VAC) | 600 |
| Contact Limiting Breaking Current (A) | 40 |
| Insulation Initial Dielectric Between Coil/Contact Class | 3,500 to 4,000 V |
| Relay Type | PCB Relay |
| Insulation Clearance Class | 5 to 8 mm |
| Environmental Ambient Temperature (Max) | 65 °C [ 149 °F ] |
| Contact Limiting Short-Time Current (A) | 30 |
| Insulation Special Features | 6000V Initial Surge Withstand Voltage between Contacts & Coil |
| Coil Voltage Rating (VDC) | 24 |
| Environmental Ambient Temperature Class | 50 to 70 deg C |
| Insulation Creepage Class | >8mm |
| Contact Switching Load (Min) | 500 mA @ 12 V |
| Insulation Initial Dielectric Between Contacts and Coil (Vrms) | 4,000 |
| Contact Current Class | 20 to 30 A, Greater Than 16A |
| Contact Limiting Continuous Current (A) | 40 |
| Contact Arrangement | 2 Form C (CO) |
| Contact Limiting Making Current (A) | 40 |
| Environmental Category of Protection | RTIII |
| Insulation Initial Resistance (MΩ) | 1,000 |
| Package Quantity | 1 |