Relé de doble función, Harmony Temporizadores Relés, 8A, 2 contactos NA/NC, 0.1s...100h, retardo al encendido, conectores de tornillo, 24V DC o 24...240V AC DC.
| Item | On Delay Timer |
|---|---|
| Number of Functions | 2 |
| Standards | IEC 61000-6-3, IEC 61000-6-4, IEC 61000-6-2, IEC 61812-1, IEC 61000-6-1 |
| Width | 22.5 mm |
| Status Led | Green LED flashing)timing in progress, Green LED steady)power ON, Yellow LEDrelay energised |
| Device Short Name | RE22 |
| Contacts Type And Composition | 2 C/O timed contact |
| Shock Resistance | 15 gn 11 ms IEC 60068-2-27 |
| Reset Time | 120 msec (on de-energisation) |
| Mounting Support | 35 mm DIN rail conforming to IEC 60715 |
| Voltage Drift | +/- 0.2 %/V |
| Immunity To Microbreaks | 10 msec |
| [Us] Rated Supply Voltage | 24...240 V AC, 24 V DC |
| Ambient Air Temperature For Storage | -30-60°C |
| Nominal Output Current | 8 A |
| Product or Component Type | relay |
| Vibration Resistance | 20 m/s² 10-150 Hz)IEC 60068-2-6 |
| Connections - Terminals | screw terminals, 2 x 1.5 mm² with cable end, screw terminals, 2 x 2.5 mm² without cable end |
| [Uimp] Rated Impulse Withstand Voltage | 5 kV 1.2-50µs IEC 60664-1, 5 kV IEC 61812-1 |
| Ip Degree of Protection | IP40 housing: conforming to IEC 60529, IP20 terminal block: conforming to IEC 60529, IP40 front face: conforming to IEC 60529 |
| Power Consumption In Va | 50-50 VA 240 V AC |
| Discrete Output Type | relay |
| Electrical Durability | 100000 cycles for resistive load, 8 A at 250 V, AC |
| Setting Accuracy of Time Delay | +/- 10 % of full scale 25°C IEC 61812-1 |
| Time Delay Range | 1...10 min, 10...100 h, 1...10 s, 0.1...1 s, 6...60 s, 6...60 min, 1...10 h |
| Time Delay Type | power on-delay |
| Housing Material | self-extinguishing |
| Insulation Resistance | 100 MOhm 500 V DC IEC 60664-1 |
| Range of Product | Harmony Timer Relays |
| Maximum Switching Voltage | 250 V |
| Breaking Capacity | 2,000 VA |
| Ambient Air Temperature For Operation | -20-60°C |
| Relative Humidity | 93-93 %, without condensation IEC 60068-2-30 |
| Minimum Pulse Duration | 30 ms, 100 ms under load |
| Dielectric Strength | 2.5 kV 1 mA/1 minute 50 Hz IEC 61812-1 |
| Mounting Position | any position in relation to normal vertical mounting plane |
| Maximum Switching Current | 8 mA |
| Mechanical Durability | 10000000 cycles |
| Repeat Accuracy | +/- 0.5 % IEC 61812-1 |
| Maximum Delay Response | 100 msec |
| Voltage Range | 0.85...1.1 Us |
| Control Type | rotary knob front panel |
| Minimum Switching Current | 10 mA 5 V |
| Temperature Drift | °, +/- 0.05 % C |
| Tightening Torque | 0.6-1 N.m IEC 60947-1 |
| Power Consumption In W | 0.7 W 24 V DC |
| Electromagnetic Compatibility | electrostatic discharge immunity test - test level: 6 kV level 3 (contact discharge) conforming to IEC 61000-4-2, electrostatic discharge immunity test - test level: 8 kV level 3 (air discharge) conforming to IEC 61000-4-2, fast transients immunity test - test level: 1 kV level 3 (capacitive connecting clip) conforming to IEC 61000-4-4, fast transients immunity test - test level: 2 kV level 3 (direct contact) conforming to IEC 61000-4-4, surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5, surge immunity test - test level: 2 kV level 3 (common mode) conforming to IEC 61000-4-5, radiated radio-frequency electromagnetic field immunity test - test level: 10 V level 3 (0.15...80 MHz) conforming to IEC 61000-4-6, electromagnetic field immunity test - test level: 10 V/m level 3 (80 MHz...1 GHz) conforming to IEC 61000-4-3, immunity to microbreaks and voltage drops - test level: 30 % (500 ms) conforming to IEC 61000-4-11, immunity to microbreaks and voltage drops - test level: 100 % (20 ms) conforming to IEC 61000-4-11, conducted and radiated emissions class B conforming to EN 55022 |
| Supply Frequency | 50...60 Hz +/- 5 % |
| Package Quantity | 1 |